New Generation of Digital Temperature Controller
o        Depth of only 78mm
o        Various temperature inputs: thermocouple, platinum resistance thermometer,
infrared temperature sensor, and analog inputs.
o        Auto-tuning and self-tuning are available. Auto-tuning is possible even while
self-tuning is being executed.
o        Heating or heating/ cooling control is available
o        Start/ stop function
o        Conforms to UL, CSA and IEC safety standards as well as CE marking.
Ordering Information
E5CZ Standard Models
Size	Power supply voltage		Number of alarm points		Control outputs	Heater burnout alarm	Model
1/16 DIN 48 (W) x 48 (H) x 78(D) mm	100 to 240 VAC		2		Relay	No	E5CZ-R2
					Voltage (for driving SSR)	No	E5CZ-Q2
Specifications
# Ratings
Supply voltage				100 to 240 VAC
Operating voltage range				85% to 110% of rated supply voltage
Power consumption				7W (7VA)
Sensor input				Thermocouple: K, J, T, E, L, U, N, R, S, B Platinum resistance thermometer: Pt100, JPt100 Infrared temperature sensor: 10 to 70๐C, 60 to 120๐C, 115 to 165๐C, 160 to 260๐C Voltage input: 0 to 50mV
Control output		Relay output		SPST-NO, 250VAC, 3A (resistive load), electrical life: 100,000 operations
		Voltage output		12 VDC +15%/-20% (PNP), max. load current:21mA, with short circuit protection circuit
Alarm output				SPST-NO, 250VAC, 1A (resistive load), electrical life: 100,000 operations
Control method				2-PID control or ON/OFF control
Setting method				Digital setting using front panel keys
Indication method				7-segment digital display and single-lighting indicator Character height: PV:10.0mm; SV:6.5mm
Other functions				According to Controller model
Ambient operating temperature				-10 to 55๐C (with no condensation or icing)
Ambient operating humidity				25% to 85%
Storage temperature				-25 to 65๐C (with no condensation or icing)
Characteristics
Indication accuracy			Thermocouple : (+/-0.5% of indicated value or +/-1๐C, whichever greater)+/-1 digit max. (see note) Platinum resistance thermometer: (+/-0.5% of indicated value or +/-1๐C, whichever greater)+/-1 digit max. Analog input: +/-0.5% FS+/-1 digit max.
Hysteresis			0.1 to 999.9๐C (in units of 0.1๐C)
Proportional band (P)			0.1 to 999.9๐C (in units of 0.1๐C)
Integral time (I)			0 to 3999 s (in units of 1 s)
Derivative time (D)			0 to 3999 s (in units of 1 s)
Control period			1 to 99 s (in units of 1 s)
Manual reset value			0.0% to 100.0% (in units of 0.1%)
Alarm setting range			-1999 to 9999 (decimal point position depends on input type)
Input sampling period			500ms
Insulation resistance			20MΩ min. (at 500 VDC)
Dielectric strength			2000VAC, 50 or 60 Hz for 1 min (between different charging terminal)
Vibration resistance			10 to 55 Hz, 20m/s2 for 10 min in X, Y, Z directions
Shock resistance			100 m/s2, 3 times each in 3 axes, 6 directions
Weight			Approx. 150g
Memory protection			EEPROM (non-volatile memory) (number of writes : 100,000)
EMC			Emission Enclosure : EN55011(GB/T 6113.1,2) Group1 classA Emission AC Mains : EN55011(GB/T 6113.1,2) Group1 classA Immunity ESD : IEC61000-4-2(GB/T 17626.2) 4kV contact discharge (level 2) 8kV air discharge (level 3) Immunity RF-interference:IEC61000-4-3(GB/T17626.3):10V/m, 80MHz-1Ghz (level 3) Immunity Conducted Disturbance : IEC61000-4-6(GB/T17626.6): 10V(0.15-80MHz) (level 3) Immunity Burst: IEC61000-4-5(GB/T17626.5):2kV power-line (level 3) 2kV signal-line (level 4)
Applicable standards			UL61010C-1, CSA C22.2 No.1010.1 Conforms to EN61326, EN61010-1 (IEC61010-1)
Note: The indication of K thermocouples in the -200 to 1300๐C range, T and N thermocouples at
a temperature of -100๐C max., and U and L thermocouples at any temperature is +/-2๐C
+/-1 digit maximum. The indication accuracy of the B thermocouples at a temperature of
400๐C max. is not specified. The indication of the R and S thermocouples at a temperature
of 200 ๐C max. is +/-3๐C+/-1 digit maximum.