osCommerce Ҫԡ  Թö  Թ  
  ˹á » ¡Թ » ͹㹡ǻ䫴 Ҫԡ  |  Թö  |  Թ   
ǴԹ
ͧѴҹ/ǡ-> (217)
ͧѴҹʹ-> (237)
ͧѴ,Ҵ-> (433)
ͧѴ㹡кǹԵ-> (424)
ͧͧԺѵԡ-> (85)
ͧѴҹآҾ-> (11)
ͧ Ŵ (59)
Ե
Թ յ
100A AC/DC Low Current Clamp-on Meter AEMC model CM605
100A AC/DC Low Current Clamp-on Meter AEMC model CM605
9,200.00ҷ
Թ
 
ͷӡäԹҷͧ
Ẻ´
͡͹
 
й䫴͹ͧҹʹǤ꡷ٻͧ
èѴԹСѺ׹
º¤ǹ
͹㹡ǻ䫴
駫СèԹ

Դ
SSL Certificate
Free SSL Secured By StartCom
͹㹡ǻ䫴 ͹㹡ǻ䫴
These are the general terms and conditions of Nanomachinery Co., Ltd for use of www.nano-machinery.com. Please read these terms and conditions carefully. Your use of the Site and the Service will be subject to these terms and conditions and by using this site you are in agreement with these conditions.

1. Definitions

In these terms and conditions, the following definitions apply:

"Nano-machinery.com" Means Nanomachinery Co., Ltd . Registered office is at 473/1 Moo 1, Soi Petchkasem 100 ,Phetchkasem Rd. ,Bangkaenue ,Bangkae ,Bangkok, 10160, THAILAND.

"Service" Means any information and services provided by Nanomachinery Co., Ltd through or via the Site;

"Web site" Means the Nanomachinery Co., Ltd web site www.nano-machinery.com

2. What you are allowed to do

2.1 You may use the Service in accordance with these terms. You may:

a. Browse the site using a compatible web browser (this site is compatible with IE5 or Netscape 6 (or later versions). Permission to browse the site includes permission to make transient or cached copies of parts of the site to the extent that this occurs in the normal course of using your browser and that these copies are used only to facilitate current or subsequent access to the Site by you

Print a copy of any page of the Site
For your own purposes, provided you do not do any of the things set out under What you are not allowed to do.

3. What you are not allowed to do

3.1 Except to the extent expressly set out in these terms, you are not allowed to make any copies of any part of the Site. 3.2 You may not remove or change anything on the Site.

3.3 Except where material is specifically available for downloading or copying, you are not allowed to copy or use any material from the Site for any commercial purpose.

3.4 You are not allowed to remove or change any copyright, trade mark or other intellectual property right notices contained in the original material or from any material copied or printed off from the Site.

3.5 You must only use the Site and anything available from the Site for lawful purposes, and you must comply with all applicable laws, statutes and regulations. You must not use the Service to:

Post, upload or otherwise transmit information or pictures that are obscene or pornographic, threatening, menacing, racist, offensive, defamatory or otherwise unlawful.
Upload files that contain software or other materials in breach of any intellectual property rights or in breach of confidence.
Download any file or materials posted by another user that you know, or reasonably should know cannot be copied or otherwise used.
Harass, stalk, threaten or otherwise violate the rights of others.
Harm or threaten to cause harm to minors.
Impersonate anyone else or otherwise misrepresent your identity or status.
Hack into the Site or any other related computer system, make excessive traffic demands, deliver viruses or forward chain letters, surveys, contests, pyramid schemes or otherwise engage in any other behaviour that may reasonably be expected to inhibit other users from using and enjoying the Site or any other web site or damage or destroy the reputation of Nanomachinery or any third party.
Use the Web site in any way that causes, or is likely to cause, the Web site or access to it to be interrupted, damaged or impaired in any way.
Collect and process others' personal data.
Advertise or offer to sell goods or services other than with written consent for banner advertising.

3.6 Nanomachinery accepts no obligation to monitor the use of the Site. However, Nanomachinery reserves the right to disclose any information as required by law and/or to remove, refuse to post or to edit any information or materials; to block your access and to take such other action as may be reasonably necessary to prevent any breach of these terms and conditions or any breach of applicable law or regulation. Nanomachinery will also in its absolute discretion fully co-operate with law enforcement and other relevant authorities with respect to any investigation of suspected unlawful activity or violation of network security.

3.7 Nanomachinery does not sell products for purchase by children. We sell children's products for purchase by adults. You must be over 18 to purchase products from nano-machinery.com. If you are under 18 you may only purchase from Nano-machinery.com only with the involvement of a parent or guardian.

4. Your personal information

4.1 Usage of your personal information is governed by Nanomachinery Privacy Policy which forms part of these Terms and Conditions. In the event that Nanomachinery undergoes reorganisation or is sold to a third party, you agree that any personal information Nanomachinery holds about you may be transferred to that reorganised entity or third party.

4.2 My Account

If you use the Web site, you are responsible for maintaining the confidentiality of your account, password and for restricting access to your computer to prevent unauthorised access to your account. You agree to accept responsibility for all activities that occur under your account or password. You must take all necessary steps to ensure that the password is kept confidential and secure and should inform us immediately if you have any reason to believe that your password has become known to anyone else, or if the password is being, or is likely to be, used in an unauthorised manner.

Please ensure that the details you provide us with are correct and complete and inform us immediately of any changes to the information that you provided when registering. You can access and update much of the information you provided us with in the My Account area of the Web site.

5. Comments, Testimonials and other content

Users of this Web site may post reviews, comments and other content; send communications; and submit suggestions, ideas, comments, questions, or other information, as long as the content is not illegal, obscene, abusive, threatening, defamatory, invasive of privacy, infringing of intellectual property rights, or otherwise injurious to third parties, or objectionable and does not consist of or contain software viruses, political campaigning, commercial solicitation, chain letters, mass mailings, or any form of "spam." You may not use a false e-mail address, impersonate any person or entity, or otherwise mislead as to the origin of any content. Nanomachinery reserves the right (but not the obligation) to remove or edit any content.

If you do post content or submit material, and unless we indicate otherwise, you grant Nanomachinery a non-exclusive, royalty-free, perpetual, irrevocable, and fully sub licensable right to use, reproduce, modify, adapt, publish, translate, create derivative works from, distribute, and display such content throughout the world in any media. You grant Nanomachinery and its affiliates and sub licensees the right to use the name that you submit in connection with such content, if they choose. You agree to waive your right to be identified as the author of such content and your right to object to derogatory treatment of such content. You agree to perform all further acts necessary to perfect any of the above rights granted by you to Nanomachinery, including the execution of deeds and documents, at the request of Nanomachinery.

You represent and warrant that you own or otherwise control all of the rights to the content that you post; that, as at the date that the content or material is submitted to Nanomachinery: (i) the content and material is accurate; (ii) use of the content and material you supply does not breach any applicable Nanomachinery policies or guidelines and will not cause injury to any person or entity (including that the content or material is not defamatory). You agree to indemnify Nanomachinery and its affiliates for all claims brought by a third party against Nanomachinery or its affiliates arising out of or in connection with a breach of any of these warranties.

6. Rights

6.1 All intellectual property rights in any material (including text, photographs and other images and sound, trade marks and logos) contained in this Site is either owned by Nanomachinery or has been licensed to Nanomachinery by the rights owner(s) so that Nanomachinery can use this material as part of its Site. You are only allowed to use this Site and the material contained in the Site as set out in these terms.

6.2 You may not systematically extract and/or re-utilise parts of the contents of the Web site without Nanomachinery express written consent. In particular, you may not utilise any data mining, robots, or similar data gathering and extraction tools to extract (whether once or many times) for re-utilisation of any substantial parts of this Web site, without Nanomachinery express written consent. You also may not create and/or publish your own database that features substantial (e.g. our prices and product listings) parts of this Web site without Nano-machinery express written consent.

Nanomachinery understands and respects the intellectual property of others. If you believe that your work has been copied In a way that constitutes copyright infringement the please read Informing Nano-machinery.com about copyright infringement.

7. Disclaimer and limitation of liability

7.1 Nanomachinery does not, and nothing in these terms and conditions shall act to exclude or limit Nanomachinery liability for death or personal injury resulting from its negligence, fraud or any other liability which may not by applicable law be excluded or limited. Your statutory rights as a consumer are not affected by any of these terms.

7.2 Subject to clause 6.1, in no event shall Nanomachinery be liable (whether for breach of contract, negligence or for any other reason) for any loss of profits, exemplary or special damages, loss of sales, loss of revenue, loss of goodwill, loss of any software or data, loss of bargain, loss of opportunity, loss of use of computer equipment, software or data, loss of or waste of management or other staff time, or for any indirect, consequential or special loss, however arising.

7.3 Subject to clauses 6.1 and 6.2, Nanomachinery liability to you whether in contract, tort or otherwise is limited to US$50.

7.4 You agree that your use of the Service is on an as is and as available basis and that your use of the Service is at your sole risk. On that basis, except as expressly set out in these terms, Nanomachinery does not enter into conditions, warranties or other terms in relation to the Site or the Service (including any implied term relating to quality, fitness for a particular purpose).

7.5 You agree that the obtaining of any material through the use of the Service is carried out at your own risk and that Nanomachinery has no liability to you in respect of such material or the effects of such material.

7.6 Nanomachinery tries to make sure that all information contained on the Site is correct, but it does not accept any liability for any error or omission. All prices and illustrations and information are to be used as a guide only, handicrafts are just that, hand made, and are loved for their imperfections and please note that colours may vary slightly from the illustration however hard Nanomachinery tries to ensure they are the same and we accept no liability if when you receive products they do not look the same as our illustrations. You should check with Nanomachinery or the relevant supplier before acting on any information on the Site.

7.7 Nanomachinery may change the format and content of the Site from time to time. You should refresh your browser each time you visit the Site to ensure that you download the most up to date version of the Site.

7.8 The Site includes links to external sites. Nanomachinery has included links to these sites to provide you with access to information and services that you may find useful or interesting. Nanomachinery are not responsible for examining or evaluating, and we do not warrant or endorse the offerings of, any of these businesses or individuals or the content of their Web sites. Nanomachinery does not assume any responsibility or liability for the actions, product, and content of any of these and any other third parties. You can tell when a third party is involved in your transactions, and we may share customer information related to those transactions with that third party. You should carefully review their privacy statements and other conditions of use.

7.9 Nanomachinery is not liable for any action you may take as a result of relying on any information provided in this Site.

8. Disclaimer of Endorsement

8.1 The currency converter information appearing on the third party website is linked to this

Website and updated periodically from a source other than Nanomachinery. Nanomachinery do not assume any responsibility for the accuracy of such pricing information or any other materials included on such third party website. Accordingly, such information must not be used in any formal analysis or estimation. Nanomachinery has included links to various third party delivery companies in which we use to ship orders made via our Web site (for example Thai EMS and UPS couriers). Nanomachinery do not assume any responsibility for the accuracy of such pricing information or any other materials included or from third party websites. Accordingly, such information must not be used in any formal analysis or estimation. All links and frames of this website to third party sites are provided as a convenience only or to help provide you with better customers service. Nanomachinery does not control or endorse the information and content contained on any such sites, or their sponsors.

8.2 Nanomachinery is under no obligation to maintain any link on this website and may remove any such link at any time in its sole discretion for any reason whatsoever.

9. Suspension and termination of Service

We will do our utmost to ensure that availability of the Web site will be uninterrupted and that transmissions will be error-free. However, due to the nature of the Internet, this cannot be guaranteed.

9.1 Nanomachinery may suspend the operation of the Site for repair or maintenance work or in order to update or upgrade the contents or functionality of the Site from time to time. Access to or use of the Site or any Sites or pages linked to it will be not necessarily be uninterrupted or error free.

9.2 Nanomachinery may terminate the Service immediately in the event you breach any of these terms and conditions or if you are late in or do not pay any sums due to Nanomachinery or any site owned and operated by Nanomachinery.

10. Enquiries or complaints

10.1 If you have any enquiries or complaints (about the Service or someone elses use of the Site) then please address them to:

Nanomachinery Co., Ltd

473/1 Moo 1, Soi Petchkasem 100 ,Phetchkasem Rd. ,Bangkaenue ,Bangkae ,Bangkok, 10160, THAILAND. E-mail: pongthorn@nano-machinery.com Or contact via our Contact us page.

11. Defamatory claims

Because Nanomachinery lists hundreds of item for sale on the Web site and hosts many thousands of comments, it is not possible for us to be aware of the contents of each product listed for sale, or each comment or review that is displayed and also for the content displayed on Our Customers page displaying testimonials given by our customers . With this, Nanomachinery operates on a "notice and takedown" basis. If you believe that any content on or advertised for sale on, the Web site contains a defamatory statement, please notify us immediately by following our Notifying Nanomachinery of Defamatory Content. Once this procedure has been followed, Nanomachinery will make all reasonable endeavours to remove the defamatory content complained about within a reasonable time.

12. General and governing law

12.1 Nanomachinery may change these terms and conditions from time to time and will endeavour to notify you of any major changes by posting a message on the Site. By browsing the Site you are accepting that you are bound by the current terms and conditions. You should check these each time you revisit the Site. These terms and conditions form the entire understanding of the parties and supersede all previous agreements, understandings and representations relating to the subject matter. If any provision of these terms and conditions is found to be unenforceable, this shall not affect the validity of any other provision. Nanomachinery may delay enforcing its rights under these terms and conditions without losing them. You agree that Nanomachinery may sub-contract the performance of any of its obligations or may assign these terms and conditions or any of its rights or obligations without giving you notice.

12.2 Nanomachinery will not be liable to you for any breach of these terms and conditions which arises because of any circumstances which Nanomachinery cannot reasonably be expected to control.

12.3 We will not be held responsible for any delay or failure to comply with our obligations under these conditions if the delay or failure arises from any cause which is beyond our reasonable control. This condition does not affect your statutory rights.

12.4 These terms and conditions shall be governed and interpreted in accordance with Thai law, and you consent to the non-exclusive jurisdiction of the Thai courts.

INFORMING NANOMACHINERY OF COPYRIGHT INFRINGEMENT

If you believe that your work has been copied in a way that constitutes copyright, then simply complete a notice to nano-machinery.com of copyright infringement to include the following important information:

Please give your full name, address and occupation. Whether you are the owner of copyright work(s) or are authorised to act on behalf of the owner. A copy of the infringing material and the web address link of where the infringing material appears. You must include the following statements I understand that this statement may be used in any court proceedings that may arise out of or relating to the copyright infringement which I have complained about followed by your statement of truth to be worded I declare the facts above to be true. To complete the letter please sign and date.

Following the above please send a printed copy to: Nanomachinery Co., Ltd, 473/1 Moo 1, Soi Petchkasem 100 ,Phetchkasem Rd. ,Bangkaenue ,Bangkae ,Bangkok, 10160, THAILAND. Please note that this procedure is exclusively for notifying Nano-machinery.com that your material has been infringed. Please provide your address, telephone number, and e-mail address:

Important Warning: giving false, misleading or inaccurate information in the Notice to Nano-machinery.com of Copyright Infringement may result in civil and criminal liability.

INFORMING NANOMACHINERY OF DEFAMATORY CONTENT

If you believe that any of the content in nano-machinery.com contains any defamatory statement(s), please notify us immediately by writing to us with the following important information:

Please give your full name, address and occupation. A copy of the material (highlighting the exact words you find defamatory you believe to cause you defamatory and the web address link of where the defamatory material appears. Please also add the reasons why you find the material defamatory and a statement of the words and why you feel they are untrue. You must include the following two statements: I understand that this statement may be used in any court proceedings that may arise out of or relating to the defamatory words which I have complained about followed by your statement of truth to be worded to declare the facts stated above to be true. Then finalise the letter with your signature and date.

Following the above please send a printed copy to: Nanomachinery Co., Ltd, 473/1 Moo 1, Soi Petchkasem 100 ,Phetchkasem Rd. ,Bangkaenue ,Bangkae ,Bangkok, 10160, THAILAND. Please note that this procedure is exclusively for notifying Nano-machinery.com that your material has been infringed. Please provide your address, telephone number, and e-mail address:

Important Warning: giving false, misleading or inaccurate information in the Notice to Nano-machinery.com of Copyright Infringement may result in civil and criminal liability.
仵
ö յ
0
ԹҢ´
01.Taper Gauge "Shinwa" Model 700A Range 1-15 mm
02.Radius Gauge "Mitutoyo" Model 186-105 Range 1-7mm.
03.෻Ѵʵ(50 .)
04.Taper Gauge "Shinwa" Model 700B Range 15-30 mm
05.ͧѺ HJ-109
06. 150 mm./6"
ԹҾ յ
Digital Push Pull Gauge "Algol" Model HF-100 Range 100 kgf
Digital Push Pull Gauge "Algol" Model HF-100 Range 100 kgf
45,500.00ҷ
36,400.00ҷ
Դ յ
Bench Center "Peacock" Model OA, Range 300 mm.
úǹ-
´Ѻ spec 蹵ҧ, ػó ..

5 ҡ 5 !
Thai English
ʡԹ
ԡúѵôԵ




Advertisement

ѷ չ ӡѴ
Ţ 4 ྪ 100 ྪ ǧҧ˹ ࢵҧ ا෾ 10160
: 086-322-6876 ,02-421-9927 硫 : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery