MCT200
Coating Thickness Gauge
Technical Specifications
Technical Specifications	Technical Parameters
Measuring Principle	Magnetic induction and Eddy current. With different external probes, the gauge can measure the thickness of non-magnetic coating on the magnetic metal substrate but also can measure the thickness of non-conductive coating on the non-magnetic metal substrate.
Measuring Range	(0 ~1250) µm, depends on probes. Maximum 10 mm for the probe F10.
Low Range Resolution	0.1 µm
Accuracy	+/-(3% Thickness +1) µm, depends on probes and conditions
Display	Digital LCD with EL backlight
Storage	Memory for up to 20 files (up to 50 values for each file) of stored values.
Unit System	Metric (µm), Imperial (mil)
Power Source	Two “AA” size,1.5 Volt alkaline batteries
Working Hours	200 hours typical operating time (EL backlight off)
Communication	USB 1.1, can connect to PC
Dimensions	125mm x 67mm x 31mm
Net Weight	340g
Features
§  Five types of probes are available for different applications, probe contact parts are made up of the hard chrome or red ruby materials, very durable.
§  With different external probes, the gauge can be applied to measuring thickness of non-magnetic coating on magnetic metal substrate, as well as non-conductive coating on non-magnetic metal substrate.
§  Two calibration methods can be applied to the gauge. The system error of the probe can be corrected with the basic probe calibration method.
§  Two measuring modes, single or continuous, changeable.
§  Measuring status indicator showing the measuring status.
§  EL display back light ensures easy reading of screen data in low light conditions.
§  Battery information indicates the rest capacity of the battery.
§  Auto sleep and auto power off function to conserve battery life.
§  USB1.1 communication port.
§  Optional software to process the memory data on the PC.
§  Compact aluminum case, suitable for poor working conditions.
Measuring Method
Zero calibration: Put the probe on standard substrate, if the instrument display reading is not 0, press ZERO key
for calibration. Repeat this operation several times to improve the calibration accuracy.
Measure: Put the probe vertical to the tested surface of the workpiece, press the probe slightly, it will show the
stable reading at the same time, then move off the probe.
Finish: After measurement, the test results can be analyzed and stored directly. Hold the probe from the workpiece
more than 10mm before measurement in next time.