MCT200
|
Coating Thickness Gauge
|
|
Technical Specifications
|
Technical Specifications
|
Technical Parameters
|
Measuring
Principle
|
Magnetic
induction and Eddy current. With different external probes, the gauge can measure
the thickness of non-magnetic coating on the magnetic metal substrate but
also can measure the thickness of non-conductive coating on the non-magnetic
metal substrate.
|
Measuring
Range
|
(0
~1250) µm, depends on probes. Maximum 10 mm for the
probe F10.
|
Low
Range Resolution
|
0.1
µm
|
Accuracy
|
+/-(3%
Thickness +1) µm, depends on probes and conditions
|
Display
|
Digital
LCD with EL backlight
|
Storage
|
Memory
for up to 20 files (up to 50 values for each file) of stored values.
|
Unit
System
|
Metric
(µm), Imperial (mil)
|
Power
Source
|
Two
“AA” size,1.5 Volt alkaline batteries
|
Working
Hours
|
200
hours typical operating time (EL backlight off)
|
Communication
|
USB
1.1, can connect to PC
|
Dimensions
|
125mm
x 67mm x 31mm
|
Net
Weight
|
340g
|
|
Features
|
§ Five types
of probes are available for different applications, probe contact parts are
made up of the hard chrome or red ruby materials, very durable.
|
§ With
different external probes, the gauge can be applied to measuring thickness of
non-magnetic coating on magnetic metal substrate, as well as non-conductive
coating on non-magnetic metal substrate.
|
§ Two
calibration methods can be applied to the gauge. The system error of the
probe can be corrected with the basic probe calibration method.
|
§ Two
measuring modes, single or continuous, changeable.
|
§ Measuring
status indicator showing the measuring status.
|
§ EL
display back light ensures easy reading of screen data in low light
conditions.
|
§ Battery
information indicates the rest capacity of the battery.
|
§ Auto
sleep and auto power off function to conserve battery life.
|
§ USB1.1
communication port.
|
§ Optional
software to process the memory data on the PC.
|
§ Compact
aluminum case, suitable for poor working conditions.
|
|
Measuring Method
|
Zero
calibration:
Put the probe on standard substrate, if the instrument display reading is not
0, press ZERO key
|
for calibration.
Repeat this operation several times to improve the calibration accuracy.
|
|
Measure: Put the
probe vertical to the tested surface of the workpiece, press the probe
slightly, it will show the
|
stable reading
at the same time, then move off the probe.
|
|
Finish: After
measurement, the test results can be analyzed and stored directly. Hold the
probe from the workpiece
|
more than 10mm
before measurement in next time.
|