CDI Computorq II ™
Computorq II ™ Digital Electronic Torque Wrench
·    Largest Storage Capacity Available
Up to 4000 torque values can be stored in memory. An audible tone signals when memory is full.
·    Down Loading Capacity
Computorq II is equipped to down-load individual torque values or store values in memory which
can be directly down-loaded to a printer/computer or datalogger via RS232.
·    Selectable Modes of Operation
"Peak Hold" and "Track" modes of operation are standard. Computorq II's electronics are far
superior to our competitors in capturing real torque value in "Peak" mode
·    Easy Set-Up
Target torque values (high and low percentage, +/- tolerances and torque engineering units) are
easily programmed through the keypad and shown on the LCD.
·    Quality Construction
Proven industrial quality. Designed for continuous use.
·    Range
Available from 5 in. lb. to 1000 ft. lb.
·    Batteries
A 9V alkaline battery is standard and provides enough power for 60 hours of operation.
A "LO BAT" indication on the display signals for replacement.
·    Accuracy
+/- 1% From 20-100% of scale
+/- 1%, plus 5 increments, from 10 -20% of scale
·    Calibration Data
All calibration data is stored in the microprocessor
·    Baud Rate
The baud rate for downloading to a printer/computer/data logger is selectable. The factory set
rate is 1200. Options are 300, 600, 1200 2400, 4800, 9600 or 19,200.
PART NUMBER	DRIVE	RANGE	INCREMENTS	LENGTH IN	WEIGHT LBS.
2503CF-II	1/2”	25-250 ft.lb.	.1 ft.lb.	21.5”	3.2”
		34-338 dNm	.1 Nm
		3.4-34 mKg	.01 mKg

           กรด-ด่าง, วัดกรด-ด่าง, วัด