Drager X-am 7000 is the innovative solution for the simultaneous and continuous
setection of up to five gases. A combination of more than 25 sensors allows flexible
aolutions to individual monitoring tasks. The Drager X-am 7000 can be equipped with
three electrochemical, and two catalytic bead, infrared or photoionisation sensors.
It is the ideal companion in a great number of applications where reliable monitoring
of Oxygen, toxic and combustible gases and vapors in the ambient air is necessary.
ü      Flexibility through sensor variety
The extensive portfolio of  over 25 different DragerSensors allows the detection of more
than 100 gases and vapors. The measuring range of the EC, Cat-Ex, IR and PID sensors
can be changed to another gas within a list of gases by a push of a button-without the
necessity of re-calibrating. In this way the instrument can be adapted easily to various applications.
DragerSensors are renowed for fast response, minor cross sensitivities, high accuracy and long life.
ü      Intelligent and interchangeable sensors
Each sensor is recognized automatically by the instrument. All sensors are pre-calibrated,
and a reconfiguration of the Drager X-am 7000 is done by simply changing a sensor i.e.
no additional service or maintenance is necessary.
ü      Leak search functionality
Searching a leak has been revolutionized by the Drager X-am 7000. In the tracking-mode;
the instrument generates an increasing or decreasing rate of beeps, depending on the gas
concentration detected.
ü      Rugged and waterproof
Additional to the built-in dust and splash water protection, the Drager X-am 7000 can be
submersed without damage. A specially designed rubber-boot protects the instrument
against damage from a drop of 1.5 m (5 ft).
ü      Information at a glance
The large graphic Display and the alarm-auto-zoom function guarantee easy recognition of
the values and symbols displayed for immediate judgement about the situation or hazards.
All information is provided in plain text.
ü      Data Management
A built-in data memory logs up to 3000 sets of values – that is data logging of 100 hours
when recording one set per minute. The data can be transmitted and evaluated on a PC
using an infrared interface together with the Drager GasVision software package.
ü      Strong Built-in Pump
The built-in high power pump allows to sample gas through an up to 45 m/ 150 ft. long tube.
The operation of the pump is continuously monitored, and the instrument will generate an alarm,
if the flow is too low.
TECHNICAL DATA
Type	Multi gas measuring and warning device for up to 5 measurement channels: electrochemical sensors ( for toxic gases and Oxygen) and 2 catalytic sensors respectively infrared sensors ( for combustible gases and vapors or Carbon Dioxide) or photoionisation sensors
Size (w x h x d. approx.)	150 x 140 x 75 mm, 5.9” x 5.6” x 3”
Weight (approx.)	Instrument Rechargeable battery	600 g, 21 oz. 490 g, 17 oz. (3.0 Ah); 730 g, 26 oz. (6.0 Ah)
Ambient conditions	Temperature	-20 to +55 ๐C, intermittent -40 to +60๐C, -5 to +105 ๐F, intermittent -40 to +130๐F
	Pressure	700 to 1300 hPa, 20.7 to 38.4 inch Hg
	Humidity	10 to 95%RH
Enclosure rating	IP67
Typical battery life	NiMH (4.8 V/3.0 Ah)	> 9 hours
	NiMH (4.8 V/6.0 Ah)	> 20 hours
	Alkaline	> 20 hours
Audible alarm	> 100 dB (A) at a distance of 30 cm; 1ft.
Charging time	3.5 to 7 hours, depending on battery type
Pump mode	maximum length of tubing 45 m, 150 ft.
Approvals	ATEX	II 2G EEx ia d IIC T4; -20≤Ta≤ +60๐C I M2 EEx ia d I EC-Type Examination Certificate BVS 03 ATEX E 371 X
	MED	Marine Equipment Directive 96/98/EC
	UL	Class I, Div 1, Group A, B, C, D; Temp Code T4
	CSA	Class I, Div 1, Group A, B, C, D; Temp Code T4
	IECEx	Ex ia d I/IIC T4; -20≤Ta≤ +60๐C
	CE-mark	electromagnetic compatibility (directive 89/336/EEC)