MVX A/B Scan Ultrasonic Thickness Gauge
The physical size, weight, and display resolution are just a few of the benefits of the
MVX.
The adjustable square wave pulser provides the flexibility necessary for both high
resolution and penetration requirements.
The  MVX is equipped with multiple viewing options to provide users with a complete set
of inspection tools : (RF waveform, +/- Rectified waveform, Time based B-Scan and Large
Digits).
The A-Scan rectified mode is commonly used for detecting flaws/ pits in pulse-echo
mode and measuring thru-paint and coating in echo-echo mode.
The time-based B-Scan feature of the  MVX displays a cross section of the test
material. It is commonly used to display the profile of the bottom surface of the test
material.
Built-in hardware AGC gain control for thru-paint measurements in multi-mode operation.
The variety of calibration options is just one more example of  MVX’s overall versatility.
The MVX has the ability to store 64 custom user-defined setups. All factory setups
can be selected, edited and saved to any setup location.
MVX is equipped with an alpha-numeric data logger to provide increased versatility for
those custom reporting needs.
The built-in transducer types offer increased linearity between transducers.
The high speed scan feature speeds up to inspection process by making 32 measurements
per second. Remove transducer from the test material and display the minimum
measurement scanned.
Visual alarm with Hi and Lo limit settings for specific application tolerances.
Use the find feature to locate the detection point, while automatically adjusting the
Display to bring the signal into view.
MVX also comes complete with our Windows® PC software for transferring data to
and from a PC.
A basic Flaw Prove-Up Mode for use with angle beam style transducers.
Multiple language support
2 year limited warranty
MVX SPECIFICATIONS
Physical
Weight: 13.5 ounces (with batteries)
Size : 2.5 w x 6.5 H x 1.24 D inches  (63.5 w x 165 H x 31.5 D mm)
Operating Temperature : -14๐ to  140๐F (-10๐ to 60๐C)
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Keyboard : Membrane switch with twelve tactile keys.
Data Output: Bi-directional RS232 serial port;  Windows® PC Interface software.
Display: 1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8 in (62 x 45.7mm);
EL backlit (on/off/auto invert).
Ultrasonic Specifications
Measurement Modes: Pulse-Echo (flaws, pits), Echo-Echo (thru-paint)
Pulser : Square wave pulser with adjustable pulse width (spike, thin, wide).
Receiver: Manual or AGC gain control with 40dB range, depending on mode selected.
Timing: 20 MHz with ultra low power , 8 bit digitizer.
Certification
Factory calibration traceable to national standards.
Warranty
2 years limited.
Power Source
·      Three 1.5V alkaline or 1.2V NiCad AA cells.
·      Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included).
·      Auto power off if idle 5 minutes.
·      Battery status icon.
Measuring
Range:
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 9.999 inches (0.63 to
254 millimeters).
Echo-Echo Mode (Thru Paint & Coatings) measures from 0.050 to 4.0 inches (1.27 to 102
millimeters). Range will vary +/- depending on the thickness of coating.
Resolution : +/-0.001 inches (0.01 millimeter)
Velocity Range: 0.0492 to .3936 in./ms. (1250 to 9,999meters/second)
Single and two points calibration option , or selection of basic material types.
Units : English & Metric
Features:
Setups:
64 custom user-definable setups; Factory setups can also be edited by the user.
Gates:
Single gate in pulse-echo mode, or single gate with holdoff in echo-echo mode;
Adjustable threshold.
Selectable Transducers:
Selectable transducer types with built-in dual path error correction for improved linearity.
Alarm Mode:
Set Hi and Lo tolerances with audible beeper and visual LEDs.
Fast-Scan Mode:
Takes 32 readings per second and displays the minimum reading found when the transducer is
Removed.