CDI Computorq II ™
Computorq II ™ Digital Electronic Torque Wrench
·   Largest Storage Capacity Available
Up to 4000 torque values can be stored in memory. An audible tone signals when memory is full.
·   Down Loading Capacity
Computorq II is equipped to down-load individual torque values or store values in memory which
can be directly down-loaded to a printer/computer or datalogger via RS232.
·   Selectable Modes of Operation
"Peak Hold" and "Track" modes of operation are standard. Computorq II's electronics are far
superior to our competitors in capturing real torque value in "Peak" mode
·   Easy Set-Up
Target torque values (high and low percentage, +/- tolerances and torque engineering units) are
easily programmed through the keypad and shown on the LCD.
·   Quality Construction
Proven industrial quality. Designed for continuous use.
·   Range
Available from 5 in. lb. to 1000 ft. lb.
·   Batteries
A 9V alkaline battery is standard and provides enough power for 60 hours of operation.
A "LO BAT" indication on the display signals for replacement.
·   Accuracy
+/- 1% From 20-100% of scale
+/- 1%, plus 5 increments, from 10 -20% of scale
·   Calibration Data
All calibration data is stored in the microprocessor
·   Baud Rate
The baud rate for downloading to a printer/computer/data logger is selectable. The factory set
rate is 1200. Options are 300, 600, 1200 2400, 4800, 9600 or 19,200.
PART NUMBER	DRIVE	RANGE	INCREMENTS	LENGTH IN	WEIGHT LBS.
6004 CF-II	3/4”	60-600 ft.lb.	.1 ft.lb.	46.5”	9.5”
		81-813 Nm	.1 Nm
		8.3-83 mKg	.01 mKg

           กรด-ด่าง, วัดกรด-ด่าง, วัด