Wixey

Digital Angle Gauge

Model WR300

SAFETY FIRST

·        Always turn off and unplug power tools before using the digital angle gauge

·        Never use your power tools without properly installed blade guards. The guards are not shown

     in our instructions only to make the illustrations clear.

INSTRUCTIONS

1.   Set the gauge flat on a reference surface such as a table saw, miter saw, or jointer table.

     On a band saw, the blade will be the reference surface.

2.   Turn ON and press the ZERO to set the gauge to 0.0 degrees which calibrates the reference

     surface.

3.   Attach to the saw blade or jointer fence using the imbedded magnets. The gauge should always

     be kept perpendicular to the table for all measurements.

4.   A properly adjusted saw blade, jointer fence or band saw table will display 90.0 degrees. If the

     reading is off, re-adjust your machine following the manufacturers instructions.

5.   Now you can press ZERO to set the gauge to 0.0 degrees and measure the angle of your saw blade,

     jointer fence or band saw table.

6.   Replace the battery by rotating the cover on the back of the gauge counter clockwise.