osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดงานซ่อม/วิศวกรรม » WR300 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
  Calibrator (19)
  Centering Head (3)
  Clamp Meter (21)
  Holiday Detector (13)
  Laser Alignment (2)
  LCR Meter (3)
  Multimeter (44)
  Steel Stamp (2)
  Stroboscope (12)
  Tachometer (22)
  Torque Tester/Wrench (7)
  Transmission Tester (9)
  Vibration Meter (14)
  Yoke (8)
  เครื่องตรวจเช็ครอยรั่ว (5)
  เครื่องถ่ายภาพความร้อน (7)
  เครื่องทดสอบฉนวน/ความต้านทาน (10)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
เครื่องมือวัดในกระบวนผลิต-> (468)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Diameter Tape “Nihon Doki” Model D-21VH
Diameter Tape “Nihon Doki” Model D-21VH
39,500.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Digital Angle Gauge "Wixey" model WR300
[WR300]
2,200.00บาท

 

 

 

Wixey

Digital Angle Gauge

Model WR300

 

SAFETY FIRST

·        Always turn off and unplug power tools before using the digital angle gauge

·        Never use your power tools without properly installed blade guards. The guards are not shown

     in our instructions only to make the illustrations clear.

 

INSTRUCTIONS

1.   Set the gauge flat on a reference surface such as a table saw, miter saw, or jointer table.

     On a band saw, the blade will be the reference surface.

2.   Turn ON and press the ZERO to set the gauge to 0.0 degrees which calibrates the reference

     surface.

3.   Attach to the saw blade or jointer fence using the imbedded magnets. The gauge should always

     be kept perpendicular to the table for all measurements.

4.   A properly adjusted saw blade, jointer fence or band saw table will display 90.0 degrees. If the

     reading is off, re-adjust your machine following the manufacturers instructions.

5.   Now you can press ZERO to set the gauge to 0.0 degrees and measure the angle of your saw blade,

     jointer fence or band saw table.

6.   Replace the battery by rotating the cover on the back of the gauge counter clockwise.

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 08 ธันวาคม, 2015.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Digital Angle Gauge "Wixey" model WR300
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery