|
Series 2-5000
|
|
Minihelic® II
Differential Pressure Gages
|
|
Combining
High Accuracy, Compactness, Dependability, and Low Cost
|
|
Combining
clean design,
small size and low cost with enough accuracy for all but
|
|
the
most demanding applications our Minihelic®
II gage offers the latest in design
|
|
features for a dial type
differential pressure gage. It is our most compact gage but
|
|
is easy to read and can safely
operate at total pressures up to 30 psig. The Minihelic®
II
|
|
is designed for panel mounting in a
single 2-5/8” diameter hole. Standard pressure
|
|
connections
are barbed fittings for 3/16” I.D. tubing; optional 1/8” male NPT
connections
|
|
are also available. Over-pressure
protection is built into the Minihelic®
II gage by means of a
|
|
blow-out membrane molded
in conjunction with the diaphragm. Accidental over-ranging up to
|
|
the rated total pressure will not
damage the gage. With removable lens and rear housing, the
|
|
gage may be easily serviced at minimum
cost.
|
|
|
|
With the housing molded from mineral and glass filled nylon and
the lens molded from acrylic,
|
|
the gage
will withstand rough use and exposure as well as high total pressure. The 5%
accuracy
|
|
and low cost of the Minihelic®
II gage make it well-suited for a wide variety of OEM and user
|
|
applications. OEM
applications include cabinet air purging, medical respiratory therapy
equipment,
|
|
air
samplers, laminar flow hoods, and electronic air cooling systems. As an air
filter gage, the
|
|
Minihelic® II
gage finds many end use applications on large stationary engines,
compressors,
|
|
ventilators, and
air handling units. The Minihelic®
II gage is suitable for many of the same
|
|
applications as the Magnehelic®
gage where the greater accuracy, sensitivity, and higher and
|
|
lower
differential pressure ranges of the Magnehelic®
gage are not required.
|
|
|
|
SPECIFICATIONS
|
|
Service:
|
Air and compatible gases.
|
|
Wetted Materials:
|
Consult factory.
|
|
Housing:
|
Glass
filled nylon; acrylic lens.
|
|
Accuracy:
|
+/-5% of full scale at 70๐F
(21.1๐C).
|
|
Pressure Limits:
|
30 psig (2.067 bar) continuous to either
pressure connection.
|
|
Temperature
Limits:
|
20
to 120๐F (-6.67 to 48.9๐C).
|
|
Size:
|
2-1/16” (52.39 mm) diameter dial
face.
|
|
Mounting Orientation:
|
Diaphragm in vertical position.
Consult factory for other position orientations.
|
|
Process
Connections:
|
Barbed,
for 3/16” I.D. tubing (standard); 1/8” male NPT (optional).
|
|
Weight:
|
6 oz (170.1 g).
|
|
|
|
|
Model
|
Range,
Inches
of Water
|
|
|
2-5000-0
|
0-0.5
|
|
|
2-5001
|
0-1.0
|
|
|
2-5002
|
0-2.0
|
|
|
2-5003
|
0-3.0
|
|
|
2-5005
|
0-5.0
|
|
|
2-5010
|
0-10
|
|
|
2-5020
|
0-20
|
|
|
2-5040
|
0-40
|
|
|
2-5060
|
0-60
|
|
|
2-5100
|
0-100
|
|
|
|
|
|
|
