Elcometer 7062 MarSurf PS10 Surface Roughness Tester
|
|
|
|
The
Elcometer 7062 surface roughness tester is a light
weight and portable measuring solution
|
|
for
the range of surface roughness measurements required for compliance to
International
|
|
Standards.
|
|
|
|
In
protective coating applications there is a requirement to measure surface
roughness.
|
|
|
|
With
31 surface parameter settings available the Elcometer
7062 surface roughness tester can
|
|
display all
parameters that comply to National & International Standards.
|
|
|
|
These
values include peak-to-valley profile measurement in combination with an
assessment of
|
|
the frequency
of peaks within the sample area.
|
|
|
|
The
Elcometer 7062 surface roughness tester is a light
weight and portable measuring solution for
|
|
the range of
surface roughness measurements required for compliance to International
Standards.
|
|
|
|
The
unit is also suitable for assessing surface roughness conditions in a wide
range of general
|
|
industrial applications;
particularly where the sample is too large to bring to the laboratory.
|
|
|
|
§ Multi-Lingual
Display: All the required information is displayed on screen in a choice of
17 languages.
|
|
§ Flexible:
Can be used in virtually any position; horizontally, vertically, upside down.
A height adjustment accessory to accommodate various sample sizes is supplied
with each gauge as standard.
|
|
§ Integrated
Calibration Standard: No external calibration standard is required; provides
greater ease of use.
|
|
§ Removable
Drive Unit: Drive unit can be removed from main unit and used with an
extension cable (included) to allow for measurement in hard to reach areas.
|
|
§ Stylus
pick-up with removable protection: 2 µm (80 µin) diamond stylus tip with a
measuring force of 0.7 mN.
Different
stylus are available for various applications.
|
|
|
|
Technical Specification
|
|
Part
Number
|
Description
|
|
K7062M001
|
Elcometer 7062 MarSurf PS10 Surface Roughness Tester
|
|
Unit
of Mesurement
|
Metric,
Imperial
|
|
Stylus
pick-up
|
Inductive
skidded stylus pick-up, 2 µm (80 µin) stylus tip, measuring force approx. 0.7
mN
|
Measuring
Range
|
0-350
µm (0-13.78 mils)
|
Resolution 8 nm (0.315 µin)
|
|
Filter
|
Phase-correct
profile filter (Gaussian filter) according to DIN EN ISO 16610-21 (formerly
ISO 11562), special filter according to DIN EN ISO 13565-1, Is filter
according to DIN EN ISO 3274 (can be switched off)
|
|
Memory
Capacity
|
3,900
profiles, 500,000 results
|
|
Battery
|
Rechargeable
battery 100V to 264V power supply
|
|
Dimensions
|
160mm
x 77mm x 50mm (6.29 x 3.03 x 1.97)
|
Weight
500g (1.10lbs)
|
|
Packing
List
|
Elcometer 7062 MarSurf PS10 base unit, drive unit, drive unit extension
cable.
1
x standard stylus pick-up, built-in battery, roughness standard integrated
into casing, height adjustment accessory, stylus pick-up protection,
universal charger/mains adapter, USB cable, carry case with shoulder strap
and belt loop, calibration certificate and operating instructions
|
|
|
|
|
|
|