Dillon Model U Force Gauges

Slim line design for added versatility.

The Model U Force Gauge is an accurate (+/-1% of full range) mechanical compression-measurement

Instruments. Its slim-line design has repeatedly proven valuable in installations where space is at a premium.

The versatility of this simple instrument is demonstrated by the fact that it can be used as a hand-held device,

permanently mounted on a flat surface plate, or used in test fixtures.

How the U Force Gauge Works

The Dillon Model U Force Gauge employs a deflection beam machined from aircraft quality alloy steel and heat

treated to develop optimum strength and spring characteristics. A precision dial indicator is mounted at the null

point of this beam.

Compression force is normally applied against a single pressure fitting mounted on the upper half of the beam. (For

accurate calibration, designate the type of pressure fitting you wish to use with the U Force Gauge. They are of four

types: domed, cupped, flat, or a flat nylon insert. Flat bottom gauges require only one fitting).

When load is exerted, the beam moves downward causing a slanted anvil on the free end to push against the

indicator plunger. The indicator reading is a direct representation of the applied load.

Dillon offers a capacity for every job

U Force Gauges are available for measurement in pounds or kilograms. There are 6-pound capacities ranging from

25 x .25 to 5,000 x 50 lb. The 4 kilogram capacities range from 10 x .1 to 500 x 5 kg.

Dillon also offers high-capacity gauges with pounds capacities from 500 to 5,000 lb and a metric model with a

capacity of 500 kg. High-capacity gauges all have flat-bottom design, and each includes one pressure fitting of

your choice.

Zero position – The Zero position on the indicator dial can be factory positioned at 12 o’clock, 3 o’clock, 6 o’clock, or

9 o’clock. The standard position is the 6 o’clock position.

Maximum pointer – Model U Force Gauges can include a maximum pointer which remains at peak load until it is

reset.

Shockless dial indicator – Offers added protection in applications where force is applied or released rapidly.

Dial orientation – The dial indicator can be factory positioned at 0^๐ (standard), 90^๐, 180^๐, 270^๐ clockwise. Photos on

this page show standard dial orientation.

Note: maximum pointer and shockless dial indicator cannot be offered on the same unit.

High-Range Flat Bottom Model U Force Gauge

Part No.

Pounds

Part No.

Kilograms

30482-0020

500 x 5

----

----

30482-0053

1,000 x 10

30482-0079

500 x 5

30478-0034

5,000 x 50

----

----