Model KMD		TABLE TYPE DEMAGNETIZER
Compact but  improved demagnetizing performance!
Application
These demagnetizers produce an alternating magnetic field on the surface by use of an AC
power source, through which workpieces are passed to remove the magnetism remaining
on their surface.
Features
§  Thick workpieces can be demagnetized effectively by moving both the face and the back over the demagnetizer.
§  These demagnetizers have good heat radiation and can withstand continuous power-on condition.
§  These demagnetizers are very powerful and can demagnetize steel materials that have properties similar to magnetic steel and have large magnetism holding power such as high-speed steel, bearing steel, nickel-chrome steel, spring steel, die steel, etc. that are usually difficult to demagnetize. (KMD-2A, KMD-30C to 50C)
If you plan to install the demagnetizer in the vertical direction or opposite direction, please contact us. [mm (in)]
Model	Power Source		Power Capacity (Current)	Working Rate	Effective Demag. Width	Dimensions				Mass
						B	L		H
KMD-2A	3-phase 200 VAC, 50/60 Hz		2kVA (5.8A)	100% ED	160 (6.29)	453 (17.8)	245 (9.64)		140 (5.51)	30kg/ 66lb
KMD-15C	Single-phase 100 VAC, 50/60 Hz		140VA (1.4A)		80 (3.15)	150 (5.90)	120 (4.72)		80 (3.15)	5kg/ 11lb
KMD-20C			300VA (3.0A)		130 (5.11)	200 (7.87)				7kg/ 15lb
KMD-30C	Single-phase 200 VAC, 50/60Hz Single-phase 220 VAC, 60Hz		0.74kVA (3.7A)		180 (7.08)	300 (11.8)	200 (7.87)		120 (4.72)	19kg/ 41lb
KMD-40C			1.04kVA (5.2A)		280 (11.0)	400 (15.7)				29kg/ 63lb
KMD-50C			1.28kVA (6.4A)		380 (14.9)	500 (19.6)				37kg/ 81lb
§  Cable, 2m. included
§  KMD-15C/20C come with a ground plug.
§  A different-voltage type (special type) is also available.