Datasheet: IntelliTone™ Pro 200 LAN Toner and Probe Series

Breakthrough digital and analog toning in one

IntelliTone™ Pro is the first toner and probe to offer digital and analog toning all in one tool. That

means it’s equipped with the most powerful cable location and verification technologies for any

work environment – even active networks.

·       Eliminates confusion over cable location; decisively rejects noise and false signals

·       Locates the correct cable bundle

·       Isolates a cable within the bundle, despite cable bleed

·       Verifies twisted-pair installation with visual end-to-end continuity test (opens, shorts and reversed pairs)

·       Identifies individual wire pairs with new SmartTone™ analog toning

·       Simplifies signal interpretation in noisy environments with multiple LED indicators

Locate cables quickly and easily

Fluke Networks has applied decades of cable test engineering expertise to the science of locating copper

cables. The result is what we call Intellitone technology – a digital signal-toning and signal-interpreting

process that rapidly zeroes in on cables.

IntelliTone technology energizes cable conductors with a smart, synchronized digital signal. Multiple tone

types occur in the signal that help you to:

·       LOCATE the correct cable bundle using maximum radiation.

·       ISOLATE a cable within the bundle using a signal with minimum radiation.

·       VERIFY cable conductor continuity with an automated signal that steps that steps through each conductor.

Toner and Probe shared features:

IntelliTone digital technology with advanced signal processing provides high-resolution measurement.

Auto-Off feature: The toner turns off automatically after 2.5 hours of inactivity. Probe turns off after 1 hour of inactivity.

SmartTone™ analog technology: IntelliTone Pro Toners generate four different analog songs which alternate every

time the pair under test is shorted; IntelliTone Pro Probes detect this tone or any other analog signal from other testers.

Battery status: 3-level battery status indicator LEDs on the toner and probe light for one second at power on

Specifications

General

Operating temperature

32^๐F to 104^๐F (0^๐C to 40^๐C)

Storage temperature

-4^๐F to +140^๐F (-20^๐C to +60^๐C)

Operating relative humidity

(% RH without condensation)

95% (50^๐F to 95^๐F; 10^๐C to 35^๐C)

75% (95^๐F to 104^๐F; 35^๐C to 40^๐C)

Uncontrolled < 50^๐F (< 10^๐C)

Vibration

Random, 2 g, 5 Hz – 500 Hz

Shock

1 m drop test with and without module

Safety

IEC 61010 Category: None

Altitude

3000 m

EMC

EN 61326-1

Battery type and life

9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical

Applications

Copper cabling media, including shielded (STP) and UTP cable;

75 or 50 Ohm coaxial cable; two conductor control, security,

generic cabling. 10 Base-T or 10/100/1000 Base-T datacom networks.

Toner

Dimensions

5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)

Display

LED

Control

Thumbwheel switch

Toner interface

Main Mod8 port for tone generation on all 4 pairs of UTP/STP cabling,

F connector for coaxial cabling, Banana jack plugs (2) – two conductor wiring

Toner frequency

IntelliTone™ signal: encoded digital signal Analog SmartTone signal:

500-1200Hz, 4 Songs

Output power

5 V p-p

Auto power down

Turns off automatically after 2.5 hours of inactivity

Probe

Dimensions

8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)

Display

(8) LED indicators, Synch LED indicator

Audio

IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal

Control

Thumbwheel switch, volume control wheel

Tone detection

Detects IntelliTone™ digitall signal for Locate, Isolate and CableMap

Detects Analog SmartTone Signal (500-1200Hz) and other analog toners.

Toner interface

Main Mod8 port for cablemap on all four pairs of UTP/STP cabling

Auto power down

Turns off automatically after one hour of inactivity