PCWI Compact
DC POROSITY DETECTORS
Features
Lightweight with ABS case
Momentary on switch allows auto shut-off
Digital display of applied voltage with integral battery condition indicator
Regulated DC voltage
Voltage ranges of 0-15Kv or 0-30Kv, fully adjustable
Clip-on battery pack
Constant test current
Sensitivity control
Overcharge protection
Single power supply
Earphones for noisy environments
Optional on/off switch in handle
Complete with
Industrial Kit:
Detector with clip-on power pack, 10hr Charger, Probe handle with neon and 2m lead, 60mm
Connector for flat brushes, 7m Earth lead with clamp, Fan Brush, 250mm Flat brass wire brush, 450mm
Probe extension, Air-operated earphones, Shoulder & Waist Harness, Kit Case, Operating instructions.
Pipeline Kit:
Detector with clip-on power pack, Spare clip-on battery pack, 10hr Charger, Probe handle with neon
and 2m lead, 7m Earth lead with clamp, Fan brush, Coil joiner with 450mm connector, Air-operated
earphones, Shoulder & Waist Harness, Kit Case, Operating instructions.
Specifications
	DC15	DC30
Unit Weight:	2.2kg	2.2kg
Packed Weight:	6.0kg	6.0kg
Display:	LCD 3¾ digits	LCD 3¾ digits
Voltage:	0 to 15kv	0 to 30kv
Resolution:	10v	100V
Short circuit:	Test current 0.5mA max.
Power supply:	Gel Cell 3Ah Slide-off
Dimensions:	260 x 160 x 70mm
Alarm:	Audible and visual
Probe handle:	2m high-voltage silicon-rubber lead
Battery condition:	LCD Display
Applications
Used for detection of coating porosity (pin-holes, or holidays) in dielectric (insulation type) coatings on conductive substrates, including concrete.
Suitable for Production Pipeline Coating operations, Tank-work and Structures. Ideal for use on storage tanks, valves and pipelines.
Housed in a fully portable ABS case, the Detectors deliver stabilized DC output of up to 30kv. Constant current source maintains applied test voltage. Full test current at low voltages (where it is needed most) when testing at low film builds (eg: 150μm – as per AS3894.1-1991).
Incorporating momentary-on and continuous-on switches (mounted on the front panel), allowing the units to be switched on momentarily for safety, or run continuously.
No need to swap power supplies or change probes to change voltage – the Detectors have clip-on battery packs that can be separately charged. Can operate off mains power (via the charger) during recharging. Fully recharged in 10 hours. Regulated DC output fully adjustable. Applied voltage and battery condition are continuously shown on the Liquid Crystal Display.