|
Easy therm
|
|
Induction heaters
|
|
Controllable,
fast, clean and save
|
|
heating
system for bearings,
|
|
couplings and other parts.
|
|
Stress-free
mounting ensured.
|
|
Advantages of TM Easy
therm induction heaters:
|
|
Fast controllable heating process.
|
|
Safe heating process; only the work piece is heated.
|
|
Elimination of hot oil bath, no risk of localized
overheating.
|
|
Suitable for sealed and shielded bearings.
|
|
Suitable for pre-greased bearings.
|
|
Suitable for bearings with polyamide cages.
|
|
|
|
Technical advantages
of TM Easy therm induction heaters:
|
|
Manufactured according to the CE Regulations.
|
|
Fast heating process through high output; Cos phi > 0,8.
|
|
“TURBO-BOOST”: In the horizontal
position the parts will heat up twice as fast.
|
|
The heating coil is placed horizontal under the part;
-
By this it is impossible to damage the coil
-
This ensures an equal temperature all over the part
(inner- and outer ring).
-
This makes it able to heat up parts with smaller bores.
|
|
All heaters are continuously
useable without any optional cooling system.
|
|
Constantly monitoring heating process by probe and
microprocessor.
|
|
Temperature control accuracy +/-2๐C.
|
|
Timer accuracy 0,01 sec.
|
|
Maintenance free.
|
|
Three years warranty.
|
|
Easy to use; user friendly design.
|
|
Ergonomic design (pivoting
yoke principle).
|
|
Automatic power
regulation, no manual pre-setting necessary.
|
|
Less than 2A/cm residual magnetism.
|
|
|
|
Easy therm 2
|
|
The
Easy therm 2 is a small powerful microprocessor
controlled induction heater for heating of small
|
|
sized components including bearings up to 40 kg!! It is
easy to use and portable, complete with a
|
|
robust case, ideal to use on location.
|
|
|
|
Technical information
|
|
|
Voltage
|
110-230V
|
|
|
Frequency
|
50
or 60Hz
|
|
|
Power
|
3.6kVA
|
|
|
Heater mass
|
17kg
|
|
|
Dimensions
|
345
x 200 x 240mm
|
|
|
Temp. mode
|
Max.
240/400 ๐C
|
|
|
Width U-core
|
120mm
|
|
|
Height U-core
|
100mm
|
|
