These LCR Meters measure capacitance, resistance (of non-inductive components) and inductance.
Components can be measured with selectable test frequencies in series or parallel modes, as desired.
4½ Digit main LCD display
3 Digit secondary LCD display
Values to 19,999
Selectable test frequencies
Simultaneously displays measured component value and Q or Dissipation Factor (D)
Display hold
Relative mode
Tolerance mode
RS 232 Interface (cable and software required)
Auto or manual ranging modes
SPECIFICATIONS
Model		BP352110	BP352100
Parameters Measured		L/C/R/D/Q/q	L/C/R/D/Q
Measuring Circuit Mode		Inductance (L) - Defaults to series mode Capacitance/ Resistance (C/R) - Defaults to parallel mode
Displays		L/C/R: Maximum display 19999 D/Q: Maximum display 999 (Auto Range)
Ranging Mode		Auto & Manual
Measuring Terminals		3 terminals with sockets
Test Frequency Accuracy: +/-0.1%		100Hz=100 Hz 120Hz=120 Hz 1KHz= 1010 Hz 10KHz= 9.6 KHz	120Hz= 120 Hz 1KHz= 1010 Hz
Backlit Display		Included	N/A
Tolerance Mode		1%, 5%, 10%, 20%	1%, 5%, 10%
Test Signal Level		0.6Vrms approx.
Measuring Rate		1 time/second, nominal
Response Time		Approx. 1 second/DUT (device under test) (@ manual range)
Auto Power-Off		5 minutes approx. without operation
Temperature Coefficient		0.15 x (Specified Accuracy)/ ๐(0-18๐ or 28-40๐)
Operation Temperature		0๐ to 40๐; 0-70% R.H.
Power Consumption		Approx. 40mA for operation/ 0.08mA after Auto Power-off
Power Requirements		1) DC 9V Battery 2) Ext. DC Adapter: DC 12Vmin – 15Vmax (Load 50mA Min.)
Protective Fuse		0.1A/250V Fuse (input protective)
Standard Accessories Include: Pair of alligator clips and 9V battery.
Catalog No.	Description
BP352110	Deluxe Dual Display Autoranging LCR Meter
BP352100	Dual Display Autoranging LCR Meter
BP87X	Software and RS232 cable for BP352110 or BP352100
BP352114	Soft carrying case
NISTME03	NIST Traceable Certificate
NISTME04	NIST Traceable Certificate with Data