|
C2000 Power Meter
|
|
With Data Storage and Logging
|
|
The Appointech C2000 handheld power meters have calibrated
outputs at LD wavelengths of
|
|
850,
1310, 1490, 1550, and 1625nm, or customer-specified ones. The operation is
very user-
|
|
friendly. After turn-on with the ON/OFF switch, the given
individual input wavelength is set by
|
|
pressing
the ג-key until the correct value
is shown on the LCD display, together with the
|
|
corresponding input power value. The power unit can be selected among dBm, mW, uW,
and
|
|
nW. When the Unit key is pressed
for about 3 seconds until dB is flashing on the LCD, the
|
|
current
input power level is taken as the new reference at 0 dB, and the following
measurement
|
|
will be the difference in dB, with respect to the new
reference. When in Auto-Off mode, as
|
|
indicated
by a power symbol with a cross on the LCD, the unit will be shut off after
about 30
|
|
minutes on-time for battery life, in case not in use for a
prolonged time. To turn it back on, press
|
|
The
ON/OFF again. The auto-off feature can be disable by pressing the Auto-Off
key, as indicated
|
|
by a power symbol without a cross on the LCD. When the battery power is
too low to assume
|
|
proper operation, an empty battery symbol is shown on the LCD
display. The included rechargeable
|
|
Battery works with a power adaptor of a USB connector, which is
also included. When charging is in
|
|
OFF-mode,
the indicator LED will be on until charging has been completed. An on-site
calibration
|
|
switch is located inside the battery compartment. When the
switch is moved to CAL,
the unit can be
|
|
calibrated on-site with respect to the customers own standard
power meter. A tool symbol is shown
|
|
on the LCD. The power of a stabilized light source of the wavelength to
be calibrated is first
|
|
measured with the standard power meter in dBm,
then with the power meter to be calibrated. The
|
|
(Set)
key is pressed to initiate calibration, as indicated by the S-symbol. Then
the power reading is
|
|
changed by pressing the up and down keys until the expected
power value is shown on the LCD.
|
|
The
(set) key is pressed again to complete the current calibration. The tool
symbol is back to indicate
|
|
the new calibration factor has been stored. The same
procedure is repeated for calibrating another
|
|
wavelength. The calibration switch has to be moved back to Normal after
calibration is finished.
|
|
The data storage feature is also available. The power is
measured at different selected wavelength,
|
|
and event location. The data are
stored, and recalled with display of event, wavelength, and power
|
|
value. The power meter can also be
programmed to measure at given time interval up to 500 data
|
|
points. The data are then up-loaded to a
PC in EXEL file through an USB cable for analysis.
|
|
Features
|
|
 Data storage, logging, and PC
up-loading
|
|
Calibration on-site with customers own standard if
needed
|
|
Display measurement in dB, dBm,
mW, uW, nW
|
|
Selection of relative/absolute
power measurement
|
|
Resolution 0.01dB; absolute accuracy +/-0.25dB
|
|
For both single-mode and multi-mode optical fiber
|
|
Small size, easy for field
applications
|
|
Light weight, about 0.2Kg
|
|
Auto power shut-off can be disabled
|
|
Rechargeable battery,
Battery-full and Battery-low indicator
|
|
Applications
|
|
Power measurements
|
|
Fiber network tests
|
|
Transmission loss measurement
|
|
Calibration of optical receivers
|
|
Specifications
|
|
Detector
Material
|
InGaAs
|
|
Calibration Wavelengths
|
850, 1310, 1490, 1550, 1625nm or customer specified ones
|
|
Power Range
|
+3 to -60 dBm or +23 to -40 dBm
|
|
Polarization Dependence
|
< 0.1 dB
|
|
Absolute Accuracy
|
+/-0.25dB under calibrated conditions
|
|
Linearity
|
+/-0.05dB
|
|
Display
|
LCD displays power in selected unit, wavelength.
Warning symbol for low battery. Auto-Off Enable/disable
|
|
Calibration Data
|
Data stored in non-volatile memory
|
|
Functions
|
ON/OFF: power switch; Auto-Off: enable/ disable switch
ג-key:
input wavelength selection
Unit-key: power unit selection, and new power reference set
Data storage and PC up-loading
On-site calibration up-down keys
Battery level indicator
|
|
Optical Connector Interface
|
FC or ST or SC or universal, adapter for other connector
available
|
|
Environmental:
§
Operation Temp. Humidity
|
-15๐C to +50๐C, 0-95% RH
(non-condensing)
-35๐C to +70๐C, 0-95% RH
(non-condensing)
|
|
Power
|
Rechargeable Lithium battery, works continuously for more than
20 hrs after 2-hrs full charge
|
|
Dimensions
(Length x Width x Height)
|
16 x 7 x 3 cm (measured without case)
|
|
Weight (w/batteries)
|
<0.2Kg
|
