TruCheck™ Plus
Accepting that some customers require more flexibility than the basic TruCheck provides,
the ‘Plus’ adds a comprehensive range of features. With three modes of operation the
TruCheck Plus is suitable for click wrenches, dial and electronic wrenches and in ‘Track’
mode will continuously monitor the torque signal.
There are three torque units – N.m, lbf,ft and lbf.in.
TruCheck Plus also has a user selectable ‘limit’ feature. The operator sets the target torque
and tolerance and the instrument will calculate whether the reading is within tolerance and
indicate the result by illuminating one of three coloured  LEDs: yellow = low, green = OK,
red = high.
Finally, TruCheck Plus has an RS-232 serial data output and comes complete with an RS-232
lead. The reading, measurement unit and limit status (Low, OK or High) are output via RS-232.
Model	Part No.	Range
TruCheck Plus 350 N.m	43222	10 – 350 N.m
TruCheck Plus 1000 N.m	43231	100 – 1000 N.m
TruCheck Plus 2000 N.m	43245	200 – 2000 N.m
Calibration Options
TruCheck instruments are supplied as standard with a traceable calibration certificate for the
clockwise direction. As an option, UKAS accredited calibration certificates from Norbar’s
laboratory can be supplied, either clockwise only or clockwise and counter clockwise.
Part No.	Description
TCACC.CW	UKAS accredited calibration clockwise
TCACC.CW + CCW	UKAS accredited calibration clockwise and counter clockwise
Note: UKAS accredited calibration is from 5% to 100% of full scale for part numbers
43221, 43226, 43222, 43250, 43252, 43253 & 43255 and
10% to 100% for part numbers 43230, 43231, 43237,43244, 43245, 43251 & 43254.