|
Descriptions
1. Double molded housing
2. 2000 counts digital display with backlight
3. Electronic overload protection
4. Auto Power Off and Low Battery indication
5. Data Hold function and MAX Hold function
Diode Test Test current of 0.3mA
typical; Open circuit voltage 1.5V DC typical.
Continuity Check Threshold <120W; Test
current < 1mA
Data Hold Button
This is a function used to freeze
the reading on the display,ideal
for later viewing.
 press the HOLD button once.When the Hold is activated,the
meter beeps,freezes the reading,and
display the HOLD indicator on the LCD.
To deactivate the HOLD function,press HOLD
button once,the meter will beep and the meter will
start reading new measurements.
MAX HOLD
This is a function used to record
the maximum readings on the display for the voltage and current ranges.
1.Press the MAX button once.When
the MAX is activated,the meter beeps,and
displays the MAX indicator on the LCD.
2.The meter will record the highest reading and freeze
the display indicating this maximum reading.
3.To deactivate the MAX function,press
MAX button once, the meter will beep and the meter will start reading
new measurements.
LCD BACKLIGHT
The backlight is ideally used in dark or dimly lit areas.
Press the button for 3 seconds,
and the bright while light will come on with the Data Hold.
To turns off the backlight press
the button for 3 seconds.
Note: The use of the backlight will
reduce the battery life considerably.
|
