|
Wet Film Thickness
|
|
|
It is
important that a coating is applied to the correct thickness. Applying too
much wet
|
|
|
coating
will not only waste and money, but also there is also a possibility of the
coating
|
|
|
cracking during the curing process. Too little coating and there
is a chance that the substrate
|
|
|
will not be sufficiently covered.
|
|
|
To control process variables, it is often desirable to measure
whilst the film is still wet. Wet film
|
|
|
measurements are also useful for systems where the dry film
thickness can only be measured
|
|
|
destructively.
|
|
|
Elcometer 3238 Long Edge Wet Film Combs
|
|
|
Similar
to the Elcometer 115, the Elcometer
3238 provides the User with more measurement points
|
|
|
(teeth).These
rectangular wet film combs are available in 3 ranges supplied either
separately or
|
|
|
in a set of 3.
|
|
|
At a glance
|
|
|
 Stainless steel wet
film combs with teeth along each long edge to provide more
|
|
|
measurement
points in on gauge.
|
|
|
Available
individually or in a pack of 3.
|
|
|
Test Method How to use a Wet Film Comb
|
|
|
Place a
comb perpendicular to, and touching the substrate. Hold the comb in position
and wait a few
|
|
|
seconds until the teeth are wet. Remove the comb from the
film.
|
|
|
The wet
film thickness lies between the biggest value coated or wet tooth and the
smallest value
|
|
|
uncoated or dry tooth value.
|
|
|
Can be used in accordance with:
|
|
|
ASTM D
4414-A
|
BS
3900-C5-7B
|
|
|
ISO
2808-7B
|
NF
T30-125
|
|
|
Model
|
Description
|
Range (μm)
|
Measurement Steps (μm)
|
Part Number
|
|
Elcometer 3238/1
|
Elcometer 3238 Long Edge Wet Film Comb
|
50-120
|
5
|
K0003238M001
|
|
Elcometer 3238/2
|
Elcometer 3238 Long Edge Wet Film Comb
|
25-600
|
25
|
K0003238M002
|
|
Elcometer 3238/3
|
Elcometer 3238 Long Edge Wet Film Comb
|
50-1200
|
50
|
K0003238M003
|
|
Elcometer 3238/4
|
Set of 3 Long Edge Wet Film Comb (Scales 1, 2 and 3)
|
K0003238M004
|
|
|
|
|
|
|
|
|
