|
TE10P Single phase true power
controller
|
|
|
|
|
|
High Accuracy control accuracy and stability better than 1%
|
|
|
The TE10P provides accurate power control for a wide range of
industrial, single phase loads. By
|
|
|
using either an analogue or digital setpoint,
the TE10P can be used for the precise control of power
|
|
|
in loads that would otherwise prove
difficult to accurately regulate. These include loads that have
|
|
|
special requirements such as:
|
|
|
Loads requiring high stability and accuracy e.g. in the
semiconductor industry.
|
|
|
Moving loads the temperatures of which are difficult to
monitor.
|
|
|
Loads with characteristics that change with time or temperature.
|
|
|
|
|
|
Flexibility
|
|
|
The TE10P is configurable for different types of input, firing
mode, feedback and load type. It is
|
|
|
suitable for driving either simple resistive loads or complex
loads such as Silicon Carbide, Platinum,
|
|
|
Molybdenum or Short Wave Infrared lamps.
|
|
|
Dynamic load fault detection allows continuous monitoring of
loads, including those with
|
|
|
characteristics that are dependent
on temperature or time.
|
|
|
The feedback type can be selected from; RMS Voltage, RMS
Current, I2, V2, Transfer Between I2 and
|
|
|
V2 , transfer between I2
and Power, True Power or Open Loop.
|
|
|
|
|
|
Communications
|
|
|
Optional RS422 or RS485 communications with Modbus or Profibus protocol
allow the TE10P to be
|
|
|
configured or controlled from
an external supervisory system.
|
|
|
|
|
|
Features
|
|
|
Current range from 16 to 400 amps. Voltage range from 100 to
500 volts. A four digit display and
|
|
|
Single push button simplify
Operating, Commissioning, Maintenance and Configuration.
|
|
|
Isolated Analogue retransmission of power.
|
|
|
Configurable Alarm Relay.
|
|
|
|
|
|
TECHNICAL SPECIFICATION
|
|
|
Electrical
|
|
|
Nominal
current (at 45 Deg. C)
|
16A,
25A, 40A, 63A, 80A, 100A, 125A, 160A, 200A, 250A, 315A and 400A
|
|
Nominal
voltage
|
100V to
500V (+10%, -15%) as product code
|
|
Supply
frequency
|
40 to 70
Hz automatic adaptation
|
|
Electronics
supply
|
Internal
or optionally 115V or 230V external (10VA)
|
|
Power
dissipation
|
1.3
watts per amp
|
|
Fusing
|
High
speed fuses: External for 16A to 100A (order separately),
internal
for 125A to 400A
|
|
Cooling
|
Natural
cooling up to 100 amps
Fan
cooled from 125 amps upwards (25VA fan)
|
|
Load
|
Any type
of single phase load (except capacitive)
|
|
|
|
