Measurement of torque driver/ torque wrench

TORQUE TESTER  DIS-IP series

Management of various torque wrench torque drivers

A new function is carried

(1) Display Board Became Legible.

     (A Measurement mode and a unit. Other coded data is displayed.)

(2) Fault charge protection loading. It is pilot-lamp lighting during charge.

Indicatort and Detector dissociate.

Easy to install to small space. Torque wrench (pre set type), Torque driver, etc.

It stands to inspection and management of a torque tool as a standard machine in the

company at a role.

Abundant variations.

Since the model of series is abundant, the torque from low torque to high torque is  

managed by package. It is the optimal as a standard machine of management.

A Display screen became large. It is very legible

Even from the distant place, a numerical check is easy.

The main features

         Yes-no decision

         Average calculation

         Data storage is 800 affairs

         A convenient functional setup of a setup of a measurement start value etc.

         Data output at real time (every about 1/180 seconds)

         USB terminal data output

Specifications

DIS-IP05

DIS-I P5

DIS-I P50

DIS-I P200

DIS-I P500

Measuring range

(at time of Track)

2.0~500mN•m

0.020~5N•m

0.20~50N•m

2.0~200N•m

2.0~500N•m

0.20~50 kgf•cm

0.20~50kgf•cm

2.0~500kgf•cm

20~2000kgf•cm

20~5000kgf•cm

0.20~45 lbf•in

0.20~45 lbf•in

2.0~450 lbf•in

20~1740 lbf•in

20~4500 lbf•in

Accuracy

+/-0.5% (499 or less digit +/-3digit)

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Measuring

mode

P-P Peak

Peak load value hold

T-R Track

Indication of real time torque value

P-D Peak down

Holding Load Value at the moment to change from upward to downward

C Real-time output

Load torque value is outputted every about 1/180 second

Decision function

Setting of torque value

A Maximum and a minimum value are in a measuring range, and a setup is possible.

Can confirm the set value by the buzzer sound or LED.

The Maximum, the minimum, and the average value

Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data.

It can save by a maximum of 10 channels.

Automatic Clearance

Automatically clear the displayed value after certain time

(0.5-3.0 sec, selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance

One-touch zero

Easy Zero-Adjustment with pressing CLEAR button

Data spec.

Data transfer

ASCII fomat (Baud rate: 19200)

Data memory

800 data

Power supply

Ni-Cd chargeable battery 1.2V x 5 cells    700mAh

Auto power save

10 minutes no use, automatically switch off

Charging time

about 3 hours

Continuous working time

12 hours

Meter outside type dimension

100(W) x 105(D) x 33(H) (It does not contain by the projection thing.)

Weight