osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » Memmert » UNE-400 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
เครื่องมือวัดในกระบวนผลิต-> (468)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Belt Alignment “Easy Laser” Model D92 BTA
Belt Alignment “Easy Laser” Model D92 BTA
45,000.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Force Convection Oven 'Memmert" Model UNE-400
[UNE-400]
84,500.00บาท 67,600.00บาท

Universal oven

Model UNE 400

Standard equipment

Ventilation and Control

  • Natural convection
  • Continuous adjustment of pre-heated fresh air admixture
  • Vent connection with restrictor flap
  • Fuzzy-supported PID microprocessor controller with integrated autodiagnostic system

     with fault indication

  • Solid state switching unit
  • 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the

     performance at the same temperature value

  • Digital 7-day-programme-timer with real time clock, precise minute setting, for one set

     value or ramp operation in combination with:

  • Integrated digital timer for tempering profile with max. 4 segments, each segment

     adjustable from 1 min to 999 hours:

          DELAYED ON

          HEATING UP

          HOLD or HOLD set-temperature-dependent with guaranteed holding time

          COOLING DOWN

  • “Loop” function to repeat profile 1-99 times or endless
  • Digital display (LED) of all set parameters, such as temperature, weekdays, time,

     programme status and set-up values

  • Resolution of display for set value 0,5C; for actual value 0, 1C below 99, 9C, 0, 5C

     above 100C

  • Long-term logging (ring store) of all relevant data, GLP-confirming as data logger-1024kB
  • Serial interface RS 232 including MEMMERT Software “Celcius” for programming and

     documentation

  • Incl. works calibration certificate for +160C

Triple Overtemperature Protection

  • In case of overtemperature due to failure, the heating is switched off at approx. 10C above

     the set temperature (fixed value)

  • Independently working, digitally adjustable electronic overtemperature controller TWW

     protection class 3.1

  • Resolution of display and setting accuracy:0,5C below 99, 9C, 1C above 100C
  • Mechanical temperature limiter TB protection class 1 switching the heating off at approx.

     10C above max. oven temperature

Textured Stainless Steel Casing

  • w x h x d: 550 x 680 x 480 mm
  • fully insulated stainless steel door with double locking and 4-point adjustment
  • rear zinc-plated steel

Interior-Heating Concept

  • w x h x d: 400 x 400 x 330 mm, 53 I
  • easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with

     integrated and protected large-area heating on four sides

  • 2 perforated stainless steel shelves

Temperature Range

  • From +30C (however, at least 5C above ambient) up to +250C

Voltage/ Power Rating

  • 230 V (+/-10%), 50/60 Hz
  • Ca. 1,400 W (during heating)
  • Adaption of effective heating power depending on the set temperature

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 30 ตุลาคม, 2008.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
Memmert
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Force Convection Oven 'Memmert" Model UNE-400
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery