osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดงานซ่อม/วิศวกรรม » Clamp Meter » 514 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
  Calibrator (19)
  Centering Head (3)
  Clamp Meter (21)
  Holiday Detector (13)
  Laser Alignment (2)
  LCR Meter (3)
  Multimeter (44)
  Steel Stamp (2)
  Stroboscope (12)
  Tachometer (22)
  Torque Tester/Wrench (7)
  Transmission Tester (9)
  Vibration Meter (14)
  Yoke (8)
  เครื่องตรวจเช็ครอยรั่ว (5)
  เครื่องถ่ายภาพความร้อน (7)
  เครื่องทดสอบฉนวน/ความต้านทาน (10)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
เครื่องมือวัดในกระบวนผลิต-> (468)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Belt Alignment “Easy Laser” Model D92 BTA
Belt Alignment “Easy Laser” Model D92 BTA
45,000.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Clamp-On Meter “AEMC” Model 514
[514]
8,700.00บาท

 

 

 

Clamp-On Meter

Models 511, 512 & 514

 

Features

*         Standard size, full function clamp-on meters

*         1000AAC or 1000AAC/DC current measurements

*         750 VAC or 1000VDC volt measurements

*         TRMS measurements (Models 512 and 514)

*         Resistance measurements to 4000Ω

*         Continuity with beeper below 40Ω

*         Frequency measurements from V and A

*         Diode test

*         1ms Peak function for fast capture of signals

*         Hold function to “freeze” readings

*         Push-button for easy ADC zeroing

*         Large, easy-to-read 4000-count display

*         42-segment analog bargraph

*         Includes test leads and soft carrying pouch

 

Applications

*         Commercial, industrial, residential and HVAC troubleshooting

*         Power panel, junction box and battery bank monitoring

*         AC or DC motor testing

*         Power plant troubleshooting

*         Electrical testing and troubleshooting on traditional and non-linear loads, such as adjustable speed drivers and computers

 

Specifications

MODELS

511

(Average Sensing)

512

(TRMS)

514

(TRMS)

GENERAL

 

Digital Display

3 ¾ digits LCD display, 4000-count (max. reading 3999)

 

Analog Display

Fast 42-segment analog bargraph display

 

Symbol and Scale Range

Automatic according to range and input signal

Sample Rate

2 samples/sec for the digital display,

20 samples/sec for the analog bargraph

 

Power Supply

9V, NEDA 1604 or 6F22 or 006P

 

Auto-Off

30 minutes

 

Jaw Opening Size Ø

1.575” (40mm) – facilitates 750MCM cable or two 500MCM cables

 

Dimension

9.53 x 2.60 x 1.42” (242 x 66 x 36mm)

 

Weight

14.10 oz (400g) with batteries

 

ENVIRONMENTAL

 

Altitude

2167 ft (2000m) max.

 

Operating Temperature

511/512: 32 to 104F (0 to 40C), <80% RH, non-condensing

514: -14 to 122F (-25 to 50C), 80%RH, non-condensing*

 

Storage Temperature

-14 to 140F (-25 to 60C), <80% RH, battery removed

 

Pollution Degree

2

 

SAFETY

 

Safety Rating

EN 61010, 600V, CAT III, EN 61010, 1000V, CAT II

 

CE Mark

Yes

 

*NOTE: If the meter is to be used below 32F (0C), we suggest that the battery be replaced to ensure proper results.

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 25 เมษายน, 2011.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Clamp-On Meter “AEMC” Model 514
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery