osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดในกระบวนผลิต » เครื่องมือวัดแรงบิด » DID-4 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
เครื่องมือวัดในกระบวนผลิต-> (468)
  Cement Tester (1)
  Flashlight (1)
  Flow Meter (8)
  Fruit Ripeness Tester (1)
  Hardness Tester (25)
  Hipot Tester (5)
  Inspection Mirror (4)
  Oscilloscope (4)
  Process Controller (2)
  Screwdriver (2)
  Static Meter (20)
  Surface Resistance/ Resistivity (14)
  Surface Roughness Tester (14)
  Waterbath (2)
  เครื่องมือวัดความกระด้าง (1)
  เครื่องมือวัดความขุ่น (1)
  เครื่องมือวัดความลึก (1)
  เครื่องมือวัดความหวาน-เค็ม (18)
  เครื่องมือวัดความแข็งของเม็ดยา (6)
  เครื่องมือวัดงานก่อสร้าง (11)
  เครื่องมือวัดอุณหภูมิ (107)
  เครื่องมือวัดแรงดัน-> (63)
  เครื่องมือวัดแรงดึง-ดัน (9)
  เครื่องมือวัดแรงบิด (53)
  เครื่องวัดความชื้น (60)
  เครื่องวัดความหนืด (2)
  เครื่องวัดความเงา (9)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Manometer “Hodaka” Model HT-1500NL
Manometer “Hodaka” Model HT-1500NL
31,000.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Digital Torque Meter “CEDAR” Model DID-4
[DID-4]
29,000.00บาท

Digital torque driver

DID-4

Various functions  Display section one apparatus

 

(1)   Unify the display section and a frame. It became stronger.

(2)  Display Measurement Mode, Unit, Etc. on Display Section.

(3)  Data Output is USB Form.

(4)  Prepare each button in accordance with operation. Button operation became simple

 

·        The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed

·        Peak, Real Time and Peak Down measuring mode (selectable)

·        800 data memory

·        Programmable High and Low set points with both audible beep and Green/Red LED   

      indicator for uniform torque lightening or GO/NO GO testing

·       Programmable screw tightening counter

·       Programmable Auto Zero function resets unit to zero for easy operation

·       Both CW and CCW operation

·       ASCII format output (USB)

·       Runs on internal NiMH batteries (for 12 hours) Auto shut-off after 10 min. of non-use

 

Specification

Model Formula

DID-4

Measuring Range

0.030 ~ 4 N· m   0.30 ~ 40 kgf· cm  0.30 ~ 35 lbf · in

Accuracy

+/-0.5% (499 or less digit +/-3 digit)

Display

The 4 figures digital display of LCD

The measurement direction

CW-CCW (right and left)

Measurement Mode

PP

Peak to peak  The highest value of load is hold-displayed.

TR

Track  A display also changes with load change.

PD

Peak-down Load catches and displays the moment included in descent from a rise.

C

Real-time Output Load torque value is outputted every about 1/160 second.

A success or failure judging function

High and low value are measurement within the limits, and can be set up.

The Maximum, the minimum, and the average value

Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.

Data memory counts

800 data/ ten channels data

Data output

ASCII format (baud rate 19200)

Auto clear time

If the set-up time comes, measurement value will be automatically cleared in 0.0 ~ 3.0 seconds (0.5s interval).

Setup of count

1 to 99 count (count in a clockwise direction)

Power supply

Ni-MH chargeable battery 1.2V x 4 cells 800mAh

Charge time/ use time

Charge about 3 hour/, continuation about 12-hour use

Auto-power-off

After the neglect during 10 minutes

Bit/ Socket part

HEX 6.35

Weight

400g

Accessories

(one piece each)

Bit #1+, #2+

Exclusive charger

Result of calibration document

Certification on calibration document/ Traceability system figure

Option

When outputting data, the cable (USB miniB) is needed.

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 27 กุมภาพันธ์, 2019.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
CEDAR
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Digital Torque Meter “CEDAR” Model DID-4
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery