osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดในกระบวนผลิต » เครื่องมือวัดแรงบิด » 501C1-II ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
เครื่องมือวัดในกระบวนผลิต-> (468)
  Cement Tester (1)
  Flashlight (1)
  Flow Meter (8)
  Fruit Ripeness Tester (1)
  Hardness Tester (25)
  Hipot Tester (5)
  Inspection Mirror (4)
  Oscilloscope (4)
  Process Controller (2)
  Screwdriver (2)
  Static Meter (20)
  Surface Resistance/ Resistivity (14)
  Surface Roughness Tester (14)
  Waterbath (2)
  เครื่องมือวัดความกระด้าง (1)
  เครื่องมือวัดความขุ่น (1)
  เครื่องมือวัดความลึก (1)
  เครื่องมือวัดความหวาน-เค็ม (18)
  เครื่องมือวัดความแข็งของเม็ดยา (6)
  เครื่องมือวัดงานก่อสร้าง (11)
  เครื่องมือวัดอุณหภูมิ (107)
  เครื่องมือวัดแรงดัน-> (63)
  เครื่องมือวัดแรงดึง-ดัน (9)
  เครื่องมือวัดแรงบิด (53)
  เครื่องวัดความชื้น (60)
  เครื่องวัดความหนืด (2)
  เครื่องวัดความเงา (9)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Diameter Tape “Nihon Doki” Model D-21VH
Diameter Tape “Nihon Doki” Model D-21VH
39,500.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Digital Torque Wrench "CDI" model 501C1-II
[501C1-II]
52,000.00บาท

CDI Computorq II ™

Computorq II ™ Digital Electronic Torque Wrench

·    Largest Storage Capacity Available

Up to 4000 torque values can be stored in memory. An audible tone signals when memory is full.

·    Down Loading Capacity

Computorq II is equipped to down-load individual torque values or store values in memory which

can be directly down-loaded to a printer/computer or datalogger via RS232.

·    Selectable Modes of Operation

"Peak Hold" and "Track" modes of operation are standard. Computorq II's electronics are far

superior to our competitors in capturing real torque value in "Peak" mode

·    Easy Set-Up

Target torque values (high and low percentage, +/- tolerances and torque engineering units) are

easily programmed through the keypad and shown on the LCD.

·    Quality Construction

Proven industrial quality. Designed for continuous use.

·    Range

Available from 5 in. lb. to 1000 ft. lb.

·    Batteries

A 9V alkaline battery is standard and provides enough power for 60 hours of operation.

A "LO BAT" indication on the display signals for replacement.

·    Accuracy

+/- 1% From 20-100% of scale

+/- 1%, plus 5 increments, from 10 -20% of scale

·    Calibration Data

All calibration data is stored in the microprocessor

·    Baud Rate

The baud rate for downloading to a printer/computer/data logger is selectable. The factory set

rate is 1200. Options are 300, 600, 1200 2400, 4800, 9600 or 19,200.

 

PART NUMBER

DRIVE

RANGE

INCREMENTS

LENGTH IN

WEIGHT LBS.

501-C1-II

1/4”

5 - 50 in.lb.

5.6 - 56 dNm

5.7 - 57 cmKg

80 - 800 in.oz.

.01 in.lb.

.01 dNm

.01 cmKg

.1 in.oz.

13.5”

1.5”



 


             


           กรด-ด่
าง, วัดกรด-ด่าง, วัด

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 26 มกราคม, 2010.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Digital Torque Wrench "CDI" model 501C1-II
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery