osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดในกระบวนผลิต » เครื่องมือวัดแรงดัน » Pressure Gauge/Indicator » 2000-0 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
เครื่องมือวัดในกระบวนผลิต-> (468)
  Cement Tester (1)
  Flashlight (1)
  Flow Meter (8)
  Fruit Ripeness Tester (1)
  Hardness Tester (25)
  Hipot Tester (5)
  Inspection Mirror (4)
  Oscilloscope (4)
  Process Controller (2)
  Screwdriver (2)
  Static Meter (20)
  Surface Resistance/ Resistivity (14)
  Surface Roughness Tester (14)
  Waterbath (2)
  เครื่องมือวัดความกระด้าง (1)
  เครื่องมือวัดความขุ่น (1)
  เครื่องมือวัดความลึก (1)
  เครื่องมือวัดความหวาน-เค็ม (18)
  เครื่องมือวัดความแข็งของเม็ดยา (6)
  เครื่องมือวัดงานก่อสร้าง (11)
  เครื่องมือวัดอุณหภูมิ (107)
  เครื่องมือวัดแรงดัน-> (63)
    Manometer (11)
    Pressure Gauge/Indicator (24)
    Pressure Recorder/Logger (17)
    Pressure Transmitter/Controller (11)
  เครื่องมือวัดแรงดึง-ดัน (9)
  เครื่องมือวัดแรงบิด (53)
  เครื่องวัดความชื้น (60)
  เครื่องวัดความหนืด (2)
  เครื่องวัดความเงา (9)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Diameter Tape “Nihon Doki” Model D-21VH
Diameter Tape “Nihon Doki” Model D-21VH
39,500.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Differential Pressure Gauge "Dwyer" model 2000-0
[2000-0]
4,900.00บาท

 

 

 

Series

Magnehelic® Differential Pressure Gages

2000

Indicate Positive, Negative or Differential, Accurate within 2%

Select the Dwyer®  Magnehelic® gage for high accuracy – guaranteed within 2%

of full scale – and for the wide choice of 81 models available to suit your needs

precisely. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly

indicates low air or non-corrosive gas pressures – either positive, negative (vacuum)

or differential. The design resists shock, vibration and over-pressures. No manometer

fluid to evaporate, freeze or cause toxic or leveling problems. It’s inexpensive, too.

 

The Magnehelic® gage is the industry standard to measure fan and blower pressures,

filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid

levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also

checks gas-air ratio controls and automatic valves, and monitors blood and

respiratory pressures in medical care equipment.

 

SPECIFICATIONS

Service: Air and non-combustible, compatible gases. (Natural Gas option available.)

Wetted Materials: Consult factory.

Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated

gray to withstand 168 hour salt spray corrosion test.

Accuracy: +/-2% of full scale (+/-3% on -0, -100 Pa, -125 Pa, 10MM and +/-4% on

- 00, -60 Pa, -6MM ranges), throughout range at 70F (21.1C)

Pressure Limits: -20 Hg to 15 psig.t (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar),

HP option: 80 psig (5.52 bar).

Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.

Temperature Limits: 20 to 140F (-6.67 to 60C).

Size: 4” (101.6 mm) Diameter dial face.

Mounting Orientation: Diaphragm in vertical position. Consult factory for other position

orientations.

Process Connections: 1/8” female NPT duplicate high and low pressure taps – one pair

side and one pair back.

Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).

Standard Accessories: Two 1/8” NPT plugs for duplicate pressure taps, two 1/8” pipe thread

to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and

snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 29 กรกฎาคม, 2010.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
Dwyer
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Differential Pressure Gauge "Dwyer" model 2000-0
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery