osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดระยะ,ขนาด » ไดอัล อินดิเคเตอร์ » F371 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
  Absolute Digimatic Caliper (2)
  Ball Gage kit (1)
  Bench Center (4)
  Benchtop Checkmaster (1)
  Bevel Protractor (4)
  Bore Gauge (1)
  Can Seam Micrometer (2)
  Combination Square Set (1)
  Crankshaft Guage (1)
  Depth Gauge (8)
  Depth Micrometer (1)
  Dial Caliper Gage (5)
  Dial Gauge (2)
  Dial Sheet Gauge (1)
  Digimatic Carbon Fiber Caliper (1)
  Digital Height Gauge (5)
  Digital Upright Gauge (2)
  Filler Gauge (8)
  Force Gauge (33)
  Inside Micrometer (3)
  Level Meter (3)
  Magnifier (2)
  Measuring Wheel (3)
  Micrometer Stand (3)
  Outside Dial Caliper (1)
  Outside Micrometer (3)
  Pin Gauge (7)
  Pitch Gages (2)
  Radius Gauge (1)
  Ring Gauge (1)
  Stop Watch (8)
  Taper Gauge (8)
  Telescoping Gage Set (1)
  Tensionmeter (42)
  Tesla Meter (8)
  Three Point inside Micrometer (2)
  Vacuum Gauge (2)
  Vernier Height Gages (2)
  Welding Gauge (11)
  กล้องขยายสำหรับโรงงาน (60X)
  ระดับน้ำ (3)
  เกจบล็อก (5)
  เกจวัดขนาดรูแกนใน (2)
  เกจวัดจานเบรก (1)
  เครื่องตรวจจับโลหะ (1)
  เครื่องตรวจวัดก๊าซรั่ว (1)
  เครื่องวัดความหนา (145)
  เครื่องวัดระยะทาง (11)
  แท่นระดับแกรนิต (3)
  ไดอัล อินดิเคเตอร์ (14)
  ไมโครมิเตอร์ (21)
  ไฮเกจ (6)
  เวอร์เนีย แคลิเปอร์ (19)
เครื่องมือวัดในกระบวนผลิต-> (468)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Charged Plate Monitor "Trek" Model 156A
Charged Plate Monitor "Trek" Model 156A
192,000.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Graphic Display Digital Indicator “Unipulse” Model F371
[F371]
73,000.00บาท

F370 & 371

 

Graphic Display Digital Indicator

 

A digital indicator that controls measurement by amplifying and performing high-speed

 

digital processing of subtle signals received from strain gauge sensor that measures pressure,

 

load or torque. With the utilization of liquid crystal touch panel display, visibility and operability

 

of wave profile display and others are greatly improved. Through its ample 20-types wave profile

 

holding function, it is the best digital indicator for graders and testers used in results judgment of

 

assembling work and auto machining.

 

 

 

Specifications

Model

F370

F371

Sensor applied voltage

DC10V/5V/2.5V Output current within 120mA  4-wire system  Applied voltage digital adjustment

Sensor input range

-3.0 ~ +3.0 mV/V

Equivalent input

calibration range

0.5 ~ 3.0mV/V

Accuracy

Non-linearity: within 0.02%FS +/-1 digit (during 3.0 mV/V input);

Zero drift: within 0.5μV/C RTI; Gain drift: 0.01%/C)

A/D converter

Speed: 2000 times/second  16 bit (binary)

Analog filter

10/30/100/300 Hz digital adjustment

Analog monitor output

---

Analog voltage proportional to sensor input  Output level: App. 2V per 1mV/V input

Analog output

D/A converter (Option)  Voltage: 0 ~ 10V; Current: 4 ~ 20mA

Display

STN color LCD (320 x 240 dot)  Indicator value: +/-99999

External output signal

Upper/lower limit comparison open collector output (HH, HI/OK/LO/LL);

Holding end output (H/E); Serial data output (SI/F); asynchoronous 600bps

Control output signal

Graphic START/STOP input; multi-holding (comparison, holding) setting values selective input; Holding control input; Digital zero-input

Graphic START/STOP input; multi-holding (comparison, graph, holding) setting values selective input; Holding control input; Digital zero-input; Calibration value selective input

Interface

(Only one of these options

can be loaded in)

SI/F intgerface; RS-232C communication interface (Option); RS-485 interface (Option); DeviceNet interface (Option); CC-Link interface (Option); BCD parallel data output (Option); D/A converter (Option)

SI/F intgerface; RS-232C communication interface; RS-485 interface (Option); DeviceNet interface (Option); CC-Link interface (Option); BCD parallel data output (Option); D/A converter (Option)

Supply voltage

AC100~240V (+/-10%) 50/60 Hz; DC12~24V (+/-15%) (Specify for DC during ordering)

Power consumption

AC Spec: max 12W; DC Spec: max 20W

AC Spec: max 15W; DC Spec: max 20W

Application requirements

Temperature: -10 ~ +40C; Humidity: 80%RH or lower (no condensation)

External dimension

100 (W) x 96(H) x 138(D) mm (not including protruding parts)

Panel cut dimension 92 x 92 (+1-0)mm

CE marking certification

EMC Directive EN61326-1 (Class A)  Safety Standard  EN61010-1

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 22 ตุลาคม, 2009.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
Unipulse
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Graphic Display Digital Indicator “Unipulse” Model F371
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery