osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดระยะ,ขนาด » เครื่องวัดความหนา » MiniTest 650 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
  Absolute Digimatic Caliper (2)
  Ball Gage kit (1)
  Bench Center (4)
  Benchtop Checkmaster (1)
  Bevel Protractor (4)
  Bore Gauge (1)
  Can Seam Micrometer (2)
  Combination Square Set (1)
  Crankshaft Guage (1)
  Depth Gauge (8)
  Depth Micrometer (1)
  Dial Caliper Gage (5)
  Dial Gauge (2)
  Dial Sheet Gauge (1)
  Digimatic Carbon Fiber Caliper (1)
  Digital Height Gauge (5)
  Digital Upright Gauge (2)
  Filler Gauge (8)
  Force Gauge (33)
  Inside Micrometer (3)
  Level Meter (3)
  Magnifier (2)
  Measuring Wheel (3)
  Micrometer Stand (3)
  Outside Dial Caliper (1)
  Outside Micrometer (3)
  Pin Gauge (7)
  Pitch Gages (2)
  Radius Gauge (1)
  Ring Gauge (1)
  Stop Watch (8)
  Taper Gauge (8)
  Telescoping Gage Set (1)
  Tensionmeter (42)
  Tesla Meter (8)
  Three Point inside Micrometer (2)
  Vacuum Gauge (2)
  Vernier Height Gages (2)
  Welding Gauge (11)
  กล้องขยายสำหรับโรงงาน (60X)
  ระดับน้ำ (3)
  เกจบล็อก (5)
  เกจวัดขนาดรูแกนใน (2)
  เกจวัดจานเบรก (1)
  เครื่องตรวจจับโลหะ (1)
  เครื่องตรวจวัดก๊าซรั่ว (1)
  เครื่องวัดความหนา (145)
  เครื่องวัดระยะทาง (11)
  แท่นระดับแกรนิต (3)
  ไดอัล อินดิเคเตอร์ (14)
  ไมโครมิเตอร์ (21)
  ไฮเกจ (6)
  เวอร์เนีย แคลิเปอร์ (19)
เครื่องมือวัดในกระบวนผลิต-> (468)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Diameter Tape “Nihon Doki” Model D-21VH
Diameter Tape “Nihon Doki” Model D-21VH
39,500.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Coating Thickness Gauge "ElektroPhysik" Model MiniTest 650F
[MiniTest 650]
35,000.00บาท

Coating thickness measurement

MiniTest 650

 

Rugged coating thickness gauge

    For any non-magnetic coatings on steel such as paint, enamel, chrome, zinc, etc.

    For any insulation coatings on non-ferrous metals such as paint, anodising, ceramics on

     aluminium, copper, zinc die-cast, brass, etc.

 

Ram-and impact-protected through rubber rimmed casing

Wear-resistant carbide metal sensor tip

 

Description

The battery-operated gauge features a backlit display and a one meter sensor cable.

The newly developed one pole sensor is made of a wear-and-tear resistant carbide material

to ensure a virtually unlimited life cycle under normal condition use.

 

An optimal ram-and impact-protection is provided through the rubber rimmed casing. Via an USB

interface, the MiniTest 650 can be connected to a PC for on-line measurements or display of the

statistics.

 

The MiniTest 650 Series is available in three models;

The MiniTest 650 F is supplied with a Magnetic Induction sensor for measuring non-magnetic coatings

over ferrous substrates.

 

The MiniTest 650 N is supplied with an Eddy Current sensor for non-conductive coatings over non-

ferrous substrates.

 

The MiniTest 650 FN is a dual sensor for measuring coatings over both ferrous and non-ferrous substrates.

This sensor has a auto-recognize feature whereby it recognizes the substrate and automatically switches

to the appropriate measuring principle.

 

Technical Specifications

Measuring range

Model F (steel)

Model N (non-ferrous metal)

Model FN (dual sensor)

0 … 3000 µm/ 120 mils

0 … 2000 µm/ 80 mils

0 … 2000 µm/ 80 mils

 

Measuring uncertainty

+/- (2% of reading + 2 µm)/ +/-(2% of reading + 0.08 mils)

 

Minimum curvature radius

5 mm/ 0.2” convex

25 mm/ 1” concave

 

Minimum measuring area

Φ 20 mm / 0.8”

 

Minimum base thickness

0.5 mm/ 20 mils (F)

50 µm/ 2 mils (N)

 

Display

4-digit screen data (11 mm/ 0.44”)

 

Measuring units

µm – mils user selectable

 

Calibration

Standard, 1-point and 2-point calibration

 

Statistics

Calculated from maximum 9.999 readings, mean value,

standard deviation, number of readings, minimum and maximum

 

Interface

USB

 

Power supply

3 Micro AAA batteries (for more than 10,000 readings)

 

Dimensions and weight

Housing: 70 mm x 122 mm x 32 mm/ 2.7” x 4.8” x 1.26”

Sensor: Φ 15 mm x 62 mm / Φ 0.60” x 2.44”; 225 grams/ 7.93 ozs

 

Ambient temperature

Gauge: 0 to 50C/ 32 to 122F

Sensor: -10 to 70C/ 14 to 158F

 

 

Special feature of the FN model:

Its dual sensor identifies the substrate material. Upon contact with the surface, the gauge automatically switches to the

suitable measuring principle based on your application. The measuring principle conforms to the DIN, ISO, BS, and

ASTM norms and standards.

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 24 มีนาคม, 2015.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
Elektrophysik
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Coating Thickness Gauge "ElektroPhysik" Model MiniTest 650F
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery