osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดระยะ,ขนาด » Crankshaft Guage » KP-500 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
  Absolute Digimatic Caliper (2)
  Ball Gage kit (1)
  Bench Center (4)
  Benchtop Checkmaster (1)
  Bevel Protractor (4)
  Bore Gauge (1)
  Can Seam Micrometer (2)
  Combination Square Set (1)
  Crankshaft Guage (1)
  Depth Gauge (8)
  Depth Micrometer (1)
  Dial Caliper Gage (5)
  Dial Gauge (2)
  Dial Sheet Gauge (1)
  Digimatic Carbon Fiber Caliper (1)
  Digital Height Gauge (5)
  Digital Upright Gauge (2)
  Filler Gauge (8)
  Force Gauge (33)
  Inside Micrometer (3)
  Level Meter (3)
  Magnifier (2)
  Measuring Wheel (3)
  Micrometer Stand (3)
  Outside Dial Caliper (1)
  Outside Micrometer (3)
  Pin Gauge (7)
  Pitch Gages (2)
  Radius Gauge (1)
  Ring Gauge (1)
  Stop Watch (8)
  Taper Gauge (8)
  Telescoping Gage Set (1)
  Tensionmeter (42)
  Tesla Meter (8)
  Three Point inside Micrometer (2)
  Vacuum Gauge (2)
  Vernier Height Gages (2)
  Welding Gauge (11)
  กล้องขยายสำหรับโรงงาน (60X)
  ระดับน้ำ (3)
  เกจบล็อก (5)
  เกจวัดขนาดรูแกนใน (2)
  เกจวัดจานเบรก (1)
  เครื่องตรวจจับโลหะ (1)
  เครื่องตรวจวัดก๊าซรั่ว (1)
  เครื่องวัดความหนา (145)
  เครื่องวัดระยะทาง (11)
  แท่นระดับแกรนิต (3)
  ไดอัล อินดิเคเตอร์ (14)
  ไมโครมิเตอร์ (21)
  ไฮเกจ (6)
  เวอร์เนีย แคลิเปอร์ (19)
เครื่องมือวัดในกระบวนผลิต-> (468)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Charged Plate Monitor "Trek" Model 156A
Charged Plate Monitor "Trek" Model 156A
192,000.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Crankshaft Gauge "Diatest" Model KP-500
[KP-500]
20,900.00บาท

Used by Service Engineers, Repairmen, Crankshaft Grinders, Production Supervisors, and

Quality Control Inspectors, DIATEST Crankshaft Gauges measure the WEB DEFLECTION

of crankshafts in:-

  • Ready-to-operate engines or compressors.
  • Assembled engines or compressors, with connecting rod in place.
  • Assembled engines or compressors, with connecting rod removed.
  • Dismantled crankshafts, between centres.

DIATEST Crankshaft Gauges are sturdy in design and furnished with hardened gauging points.

They are ideally suited to rugged working conditions.

DIATEST Crankshaft Gauges are supplied in Sets consisting of a dial gauge unit with

spring-loaded (live) gauging point and a full set of gauging extensions and fixed gauging points

to suit ranges stated. The Sets come in fitted hardwood cases.

Set

Range

(distance between webs)

Dial grad.

 

KP-150

45 to 150 mm

0.01 mm

 

KP-300

60 to 300 mm

0.01 mm

 

KP-500

60 to 500 mm

0.01 mm

 

KP-150-Z

1.75 to 6”

.0005”

 

KP-300-Z

2.36 to 12”

.0005”

 

KP-500-Z

2.36 to 20”

.0005”

 

Sets KP-300 and KP-500, and Sets KP-300-Z and KP-500-Z use the same box, and their

component parts are interchangeable. Extensions to increase the range of Set KP-300

(KP-300-Z) to 500 mm (20 in.) are available separately. Sets KP-150 and KP-150-Z use a different

dial gauge unit which is not interchangeable with the two larger sets.

Given the care normally accorded to inspection equipment, the only maintenance DIATEST Crankshaft

Gauges require to provide many hours of trouble-free service is a few drops of a light, resin-free oil

spread on the live gauge point.

The DIATEST Crankshaft Gauge converts to a CYLINDER GAUGE by means of a set of ball-nosed

anvils and cap, available as an accessory.

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 21 มกราคม, 2009.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
Diatest
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Crankshaft Gauge "Diatest" Model KP-500
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery