TSM5 Tension Meter

The TSM5 is a pocket sized belt tension meter which measures the static tension of all common toothed,

vee, flat and multi-rib belts.

Setting the correct static tension ( pretensionFpt) influences the working life, bearing loads, noise levels and

positioning accuracy of the belt. The value Fptcan be determined by calculation where the peripheral force

is known or empirically where the torque value is unknown. Generally the ideal pretension level is that which gives

the least vibration of the unloaded belt span in operation. The tension meter is designed to measure the static

tension of a belt by determining the natural frequency of vibration of the belt under tension.

The natural frequency is a function of :

·       The static tension (Fpt in N)

·       The span length between two fixed points (L in metres)

·       The belt width in millimetres (b in mm)

·       The constant K specific to each belt type

Operating Instructions:

On a static drive, gently tap the belt between two fixed points using a finger or a small screwdriver.

Simultaneously hold the sensor head a few millimetres from the belt and press the red button.

The display will show the frequency of vibration in hertz (Hz).

To repeat the reading, release the button and repeat the process.

It is recommended that several readings are taken to obtain an average value in order to eliminate possible errors due to harmonic interference frequencies.

Specifications:

·        Frequency range: from 7Hz to 450Hz

·        Accuracy: +/-5%

·        Supplied with long-life 9V alkaline battery and transport case with instructions.

·       CE marked