osCommerce ข้อมูลสมาชิก  สินค้าในรถเข็น  ชำระเงิน  
  หน้าแรก » รายการสินค้า » เครื่องมือวัดระยะ,ขนาด » FMP30 ข้อมูลสมาชิก  |  สินค้าในรถเข็น  |  ชำระเงิน   
หมวดสินค้า
เครื่องมือวัดงานซ่อม/วิศวกรรม-> (247)
เครื่องมือวัดด้านความปลอดภัย-> (273)
เครื่องมือวัดระยะ,ขนาด-> (466)
  Absolute Digimatic Caliper (2)
  Ball Gage kit (1)
  Bench Center (4)
  Benchtop Checkmaster (1)
  Bevel Protractor (4)
  Bore Gauge (1)
  Can Seam Micrometer (2)
  Combination Square Set (1)
  Crankshaft Guage (1)
  Depth Gauge (8)
  Depth Micrometer (1)
  Dial Caliper Gage (5)
  Dial Gauge (2)
  Dial Sheet Gauge (1)
  Digimatic Carbon Fiber Caliper (1)
  Digital Height Gauge (5)
  Digital Upright Gauge (2)
  Filler Gauge (8)
  Force Gauge (33)
  Inside Micrometer (3)
  Level Meter (3)
  Magnifier (2)
  Measuring Wheel (3)
  Micrometer Stand (3)
  Outside Dial Caliper (1)
  Outside Micrometer (3)
  Pin Gauge (7)
  Pitch Gages (2)
  Radius Gauge (1)
  Ring Gauge (1)
  Stop Watch (8)
  Taper Gauge (8)
  Telescoping Gage Set (1)
  Tensionmeter (42)
  Tesla Meter (8)
  Three Point inside Micrometer (2)
  Vacuum Gauge (2)
  Vernier Height Gages (2)
  Welding Gauge (11)
  กล้องขยายสำหรับโรงงาน (60X)
  ระดับน้ำ (3)
  เกจบล็อก (5)
  เกจวัดขนาดรูแกนใน (2)
  เกจวัดจานเบรก (1)
  เครื่องตรวจจับโลหะ (1)
  เครื่องตรวจวัดก๊าซรั่ว (1)
  เครื่องวัดความหนา (145)
  เครื่องวัดระยะทาง (11)
  แท่นระดับแกรนิต (3)
  ไดอัล อินดิเคเตอร์ (14)
  ไมโครมิเตอร์ (21)
  ไฮเกจ (6)
  เวอร์เนีย แคลิเปอร์ (19)
เครื่องมือวัดในกระบวนผลิต-> (468)
เครื่องมือในห้องปฏิบัติการ-> (94)
เครื่องวัดด้านสุขภาพ-> (21)
เครื่องชั่ง และโหลดเซล (62)
ผู้ผลิต
สินค้าใหม่ มีต่อ
Charged Plate Monitor "Trek" Model 156A
Charged Plate Monitor "Trek" Model 156A
192,000.00บาท
ค้นหาสินค้า
 
ใส่คีย์เวิร์ดเพื่อทำการค้นหาสินค้าที่ต้องการ
ค้นหาแบบละเอียด
บอกต่อเพื่อน
 
แนะนำเว็บไซด์นี้ให้เพื่อนของท่านโดยใส่อีเมล์แอดเดรสแล้วคลิ๊กที่รูปซองจดหมาย
ข้อมูล
การจัดส่งสินค้าและการรับคืน
นโยบายความเป็นส่วนตัว
เงื่อนไขในการใช้เวปไซด์
การสั้งซื้อและการจ่ายเงิน
โปรโมชั่นพิเศษ
ติดต่อเรา
SSL Certificate
Free SSL Secured By StartCom
Feritscope "Fischer" model FMP30
[FMP30]
262,500.00บาท

FERITSCOPE® FMP30 Measurement of the Ferrite Content in Austenitic and Duplex Steel

 

Chemical, utility and other processing plants are often exposed to heat, aggressive media

 

and high pressure. These circumstances require corrosion and acid resistant steel that is

 

mechanically resilient even at high temperatures. If the ferrite content is too low, the weld is

 

susceptible to cracking under heat, if the ferrite content is too high, the weld loses its toughness

 

and ductility. For duplex steel, a lack of ferrite in the area of the weld seam is an indicator of

 

susceptibility to cracking under tension or vibration.

 

 

 

Characteristic features:

 

*         Non-destructive measurement of the ferrite content in a range of 0.1 to 110 FN or 0.1 to 80% Fe in austenitic and duplex steel

*         User-friendly instrument operation

*         Large display, rich in contrast with 240 x 160 pixels

*         USB port for data transfer to PC or printer

*         Mechanical sliders to cover keys not required for the measurement operation

*         Ready to make measurements right after power-up

*         Measurement automatic upon probe placement through external trigger via instrument button or PC

*         Automatic probe recognition

*         Audible signal at measurement acquisition

*         Only one calibration required for the entire practically relevant measurement range from 0.1 to about 90 FN. Measurement accuracy according to ANSI/AWS A4.2M/A4.2:1997 standard

*         Calibration with standards traceable to TWI secondary standards or with customer-specific standards

*         Adjustable instrument switch-off or continuous operation

*         Lockable keyboard/ restricted operating mode

*         Various status displays (e.g., warning message when battery voltage drops)

*         Various language settings

*         Measurement units selectable between WRC-FN and %Fe

*         Memory for up to 20,000 readings

*         Up to 100 applications for measuring application specific calibrations

*         Capability of allocating readings into up to 4,000 blocks

*         Date and time stamp for blocks

*         Display of statistical common characteristic values such as mean value, standard deviation, min, max, range in the block and final results. Output of characteristic variance-analytical values

*         Graphical measurement display as a histogram with a Gaussian plot

*         Capability of entering process tolerance limits and computation of the associated process capability in dices cp and cpk

*         Audible and visual warning when tolerance limits are exceeded

*         Free-running display with additional presentation of the reading as an analog bar between the tolerance limits

*         Matrix measuring mode for connected multi-point measurements, e.g., in a pre-defined surface array

 

สินค้านี้ถูกบันทึกอยู่ในรายการสินค้าเมื่อ 25 กันยายน, 2009.
ความคิดเห็น
รถเข็น มีต่อ
0 ชิ้น
ข้อมูลผู้ผลิต
Fischer
สินค้าอื่น
ข่าวสาร มีต่อ
รับข่าวสารแจ้งข่าวสารสินค้าให้ทราบเมื่อมีการเปลี่ยนแปลง Feritscope "Fischer" model FMP30
บอกต่อเพื่อน
 
บอกต่อเพื่อนเกียวกับสินค้านี้
ความคิดเห็น มีต่อ
แสดงความคิดเห็นแสดงความคิดเห็นสินค้านี้
ภาษา
Thai English
สกุลเงิน
บริการบัตรเครดิต




Advertisement

บริษัท นาโนแมชชีนเนอรี่ จำกัด
เลขที่ 4 ซอยเพชรเกษม 100 ถนนเพชรเกษม แขวงบางแคเหนือ เขตบางแค กรุงเทพฯ 10160
โทร : 086-322-6876 ,02-421-9927 แฟ็กซ์ : 02-809-2591 E-mail : pongthorn@nano-machinery.com
Copyright © 2005 Nano Machinery
Powered by Nano Machinery